Apply to be a TradeMaster!
Filter menu expanded

Filters

8 items
Reset

SORT

Product Availability
–

Show In Stock Only (7)

Size
–

2" (2)
3" (1)
4" (2)
8" (2)
11" (1)
8-1/2" (1)

Outlet Type
–

No Hub (3)

Review Score
–

(1)
(3)

Price Range
–

$100 to $200 (2)
$200 to $300 (1)
$300 to $400 (2)
$400 to $500 (1)
$800 to $900 (2)

Z100 15 in. Diameter Main Roof Drains

Help Face
Need a little help?
8 items
Grid
List
Compare
Product Image of 2" x 15" Diameter Main Roof Drain (No Hub Outlet)
2" x 15" Diameter Main Roof Drain (No Hub Outlet)
SKU: Z100-2NH
Zurn
SKU: Z100-2NH
Brand: Zurn
(1)
$342.92 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of 3" x 15" Diameter Main Roof Drain (No Hub Outlet)
3" x 15" Diameter Main Roof Drain (No Hub Outlet)
SKU: Z100-3NH
Zurn
SKU: Z100-3NH
Brand: Zurn
(1)
$819.99 each
In Stock
Get 11 by Wed, Nov 25
In Stock
Get 11 by Wed, Nov 25
Compare
Product Image of 4" x 15" Diameter Main Roof Drain (No Hub Outlet)
4" x 15" Diameter Main Roof Drain (No Hub Outlet)
SKU: Z100-4NH
Zurn
SKU: Z100-4NH
Brand: Zurn
(1)
$819.99 each
In Stock
Get 10 by Mon, Nov 23
In Stock
Get 10 by Mon, Nov 23
Compare
Product Image of Z100 4" Cast Iron Roof Drain
Z100 4" Cast Iron Roof Drain
SKU: P100-4NH
Zurn
SKU: P100-4NH
Brand: Zurn
(1)
$357.31 each
In Stock
Get 51 by Tue, Nov 24
In Stock
Get 51 by Tue, Nov 24
Compare
Product Image of Z121 11" Cast Iron Clamping Collar
Z121 11" Cast Iron Clamping Collar
SKU: P121-CC
Zurn
SKU: P121-CC
Brand: Zurn
$170.99 each
In Stock
Get 150 by Tue, Nov 24
In Stock
Get 150 by Tue, Nov 24
Compare
Product Image of Z100 8" x 2" Cast Iron Roof Drain
Z100 8" x 2" Cast Iron Roof Drain
SKU: P100-C2-5
Zurn
SKU: P100-C2-5
Brand: Zurn
$286.99 each
In Stock
Get 23 by Tue, Nov 24
In Stock
Get 23 by Tue, Nov 24
Compare
Product Image of Z121 8-1/2" Cast Iron Clamping Collar
Z121 8-1/2" Cast Iron Clamping Collar
SKU: P125-CC
Zurn
SKU: P125-CC
Brand: Zurn
$167.99 each
In Stock
Get 9 by Tue, Nov 24
In Stock
Get 9 by Tue, Nov 24
Compare
Product Image of Z121 8" Cast Iron Dome Strainer
Z121 8" Cast Iron Dome Strainer
SKU: P125-DOME-CI
Zurn
SKU: P125-DOME-CI
Brand: Zurn
$420.99 each
In Stock
Get 1 by Mon, Nov 23
In Stock
Get 1 by Mon, Nov 23
Resources
FAQs, Manuals & Videos
Other Resources
Articles
More About Z100 15 in. Diameter Main Roof Drains

Z100 15 in. Diameter Main Roof Drains are primary roof drainage fittings built by Zurn to carry water off a flat or low-slope commercial roof and into the building's storm drainage piping. Each drain uses a Dura-Coated cast iron body paired with a combination membrane flashing clamp and gravel guard, which lets the roofing membrane tie directly into the drain during installation. The dome sits at roughly 12 1/2 inches in diameter and is available in poly, cast iron, bronze, or aluminum, depending on the level of foot traffic and durability the roof needs. Pipe outlets range from 2 inch through 6 inch, so contractors match the drain to whatever leader or riser size the plumbing plans call for. Roofing and plumbing contractors spec this drain on commercial and institutional buildings where a flat roof needs a primary drain path in addition to overflow or secondary drainage, and getting the outlet size and dome material right during rough-in avoids a mismatch once the roofing membrane goes down.

Subcategories

  • Dome Material Options: Zurn offers the Z100 dome in poly, cast iron, bronze, and aluminum, each roughly 12 1/2 inches in diameter. Roofing contractors pick poly for standard low-traffic commercial roofs and step up to cast iron or bronze on roofs that see foot traffic or need extra impact resistance. Aluminum domes offer a lighter-weight option where the roof structure or maintenance access favors less weight at the drain.
  • Pipe Outlet Sizes: The Z100 body accepts outlet sizes from 2 inch through 6 inch, so the same drain body works across a range of leader and riser pipe sizes. Contractors size the outlet to the calculated roof drainage load rather than defaulting to whatever pipe happens to be on the truck. Matching the outlet size to the plumbing plan keeps the drain from becoming a bottleneck during heavy rain.
  • Body & Flashing Construction: Every Z100 drain uses a Dura-Coated cast iron body combined with a combination membrane flashing clamp and gravel guard in a single assembly. The flashing clamp lets the roofer secure the membrane directly to the drain during installation instead of adding a separate flashing ring. Combining the clamp and gravel guard in one part reduces the number of separate pieces a roofing crew has to align during rough-in.
  • Weight and Open-Area Classes: Open dome area and drain weight vary by outlet size, with smaller 2, 3, and 4 inch outlet models running lighter than the larger 5 and 6 inch outlet versions. Contractors calculating drainage capacity for a roof section reference the open-area figures for the specific outlet size chosen rather than assuming one number applies across the whole Z100 line. Confirming the open-area rating against the roof's drainage load calculation matters most on larger flat roofs with a single primary drain per section.

Buying Guide

Start the selection process with the roof's drainage load calculation rather than the drain body itself. Local plumbing code typically dictates the minimum outlet size and number of primary drains based on roof area and rainfall intensity, so pull that calculation before choosing a pipe outlet size. Z100 15 in. Diameter Main Roof Drains accept outlets from 2 inch through 6 inch on the same cast iron body, which lets one drain body cover a range of load requirements once the outlet size is confirmed. Next, match the dome material to expected roof traffic. Poly domes suit standard low-traffic commercial roofs, while cast iron or bronze domes hold up better where maintenance crews or mechanical equipment cross the roof regularly, and aluminum domes offer a lighter option where weight at the drain matters. Confirm the flashing and gravel guard style fits how the roofing membrane will be installed, since the Z100's combination membrane flashing clamp and gravel guard is built to receive the membrane directly rather than requiring a separate flashing ring. Check that the primary drain is paired with the correct overflow or secondary drainage per code, since a primary roof drain alone rarely satisfies a commercial roof drainage plan. Finally, confirm the open dome area rating for the chosen outlet size against the calculated drainage load, since that figure changes across the 2 inch through 6 inch outlet range rather than staying constant.

Frequently Asked Questions

What outlet sizes does the Z100 roof drain come in?

The Z100 body accepts outlets from 2 inch through 6 inch on the same cast iron body, so one drain casting covers a range of leader and riser pipe sizes. Contractors size the outlet to the calculated roof drainage load rather than a standard default size. Confirming the outlet size against the plumbing plan before ordering avoids a mismatch at rough-in.

What dome materials are available for the Z100?

Zurn offers the Z100 dome in poly, cast iron, bronze, and aluminum, each roughly 12 1/2 inches in diameter. Poly suits standard low-traffic commercial roofs, while cast iron and bronze hold up better where maintenance crews or equipment cross the roof. Aluminum offers a lighter-weight option where reducing weight at the drain matters more than added durability.

How does the flashing clamp work on this drain?

The Z100 uses a combination membrane flashing clamp and gravel guard built into the drain body. Roofers secure the roofing membrane directly to the clamp during installation instead of adding a separate flashing ring to the assembly. Combining the clamp and gravel guard into one part reduces the number of pieces the roofing crew has to align.

Is the Z100 a primary or secondary roof drain?

The Z100 functions as a primary roof drain, carrying normal rainfall off the roof and into the building's storm drainage piping. Commercial roof drainage plans generally pair a primary drain like the Z100 with a separate overflow or secondary drain required by code. Relying on the primary drain alone rarely satisfies a commercial roof drainage plan.

What is the body material of the Z100 roof drain?

The Z100 uses a Dura-Coated cast iron body across its outlet size range. The coating and cast iron construction are paired with the combination membrane flashing clamp and gravel guard included on every unit. Contractors specify this body material on commercial and institutional flat roofs where a durable primary drain path is required.

Didn't find what you're looking for? 
Let us know
.