41000 Series Range Hoods are non-ducted, under-cabinet range hoods designed to filter cooking smoke and odors and recirculate the air back into the kitchen rather than vent it outdoors. The line comes in 24, 30, 36, and 42 inch widths with a 17-1/2 inch depth, giving installers a size to fit most standard cabinet openings without custom trim work. Each hood uses a two-speed fan switch paired with a separate light switch, so the fan and light operate independently. A removable combination grease-and-charcoal filter captures cooking grease and odor before the air recirculates, and the motor is permanently lubricated with a rated speed that doesn't exceed 2850 RPM. The hood accepts an LED bulb rated up to 75 watts, sold separately from the unit. UL listing on the line confirms it meets recognized safety standards for kitchen ventilation equipment, which matters most in rental properties and multi-unit buildings where code compliance gets checked at turnover.
Subcategories
Buying Guide
Start with the width of the existing range or cooktop. Widths in this hood line include 24, 30, 36, and 42 inches, and matching hood width to the cooktop width, or to the cabinet opening above it, keeps the installation looking proportional and avoids gaps on either side.
Confirm depth clearance next. Every width in the series shares a 17-1/2 inch depth, so check that measurement against the available under-cabinet space and any obstructions like a window sill or upper cabinet trim before ordering.
Decide whether a ducted or non-ducted hood fits the kitchen. 41000 Series Range Hoods run non-ducted, filtering air through a removable combination grease-and-charcoal filter and recirculating it back into the room rather than venting outdoors. Kitchens without existing ductwork or a nearby exterior wall are good candidates for this style, since adding ductwork later adds labor and cost that a non-ducted hood avoids entirely.
Check the light and fan controls needed. A two-speed fan switch and separate light switch come standard, letting the light run independently of the fan.
Finally, confirm bulb type before ordering, since the hood accepts an LED bulb rated up to 75 watts, sold separately. UL listing on the line supports use in rental and multi-unit properties where code compliance gets verified at turnover.
Frequently Asked Questions
What sizes does the 41000 Series Range Hood come in?
The 41000 Series comes in 24, 30, 36, and 42 inch widths, all sharing a 17-1/2 inch depth. Matching hood width to the cooktop or cabinet opening keeps the installation looking proportional. Checking width and depth against the space available avoids an awkward fit at installation.
Is the 41000 Series Range Hood ducted or non-ducted?
41000 Series Range Hoods are non-ducted, filtering air through a removable combination grease-and-charcoal filter and recirculating it back into the kitchen. Non-ducted design suits kitchens without existing ductwork or a nearby exterior wall for venting. Filter replacement keeps the recirculated air clean over time.
What light bulb does the 41000 Series Range Hood use?
The 41000 Series accepts an LED bulb rated up to 75 watts, sold separately from the hood. A separate light switch lets the light run independently of the fan. Checking bulb wattage against the 75 watt maximum avoids overloading the fixture.
How many fan speeds does the 41000 Series offer?
The 41000 Series uses a two-speed fan switch paired with a separate light switch. Two-speed control covers lighter cooking tasks on low and heavier cooking on high without the cost of variable-speed electronics. The permanently lubricated motor keeps rated speed at or below 2850 RPM on either setting.
Is the 41000 Series Range Hood UL listed?
The 41000 Series carries UL listing, confirming it meets recognized safety standards for kitchen ventilation equipment. UL listing matters most in rental properties and multi-unit buildings where code compliance gets checked at turnover. Documentation of the listing is available through the manufacturer's spec sheet.