A28 Series Temperature Controls are two stage temperature controls from Johnson Controls that use a liquid filled sensing element for HVAC/R equipment. Two stage action lets one control sequence two loads from a single sensing point. The series uses SPDT snap acting switches and is unaffected by changes in barometric pressure and cross ambient conditions. Wide temperature ranges are available, such as 60°F to 140°F on the A28AA-37C, and the series holds a constant differential throughout the range. A compact enclosure and a variety of sensing element styles let contractors match the control to the application. Selecting the right range, differential type, and sensing element style decides whether the second stage cuts in where the system needs it, so the model number deserves a careful check before ordering.
Subcategories
Buying Guide
Start with the setpoint range. Pick the A28 model whose range covers the target temperature with room to adjust, such as 60°F to 140°F on the A28AA-37C, 40°F to 90°F on the A28AA-36C, or minus 30°F to 100°F on the A28AA-29C. A setpoint near either end of a range leaves little margin for field changes. Two stage control needs both setpoints inside the range, so list them before comparing models.
Next, decide on the differential. The A28AA-29C and A28AA-36C list an adjustable interstage differential, which sets the gap between the two stages. The series holds a constant differential throughout the range, so confirm whether the job needs that gap adjustable. When comparing A28 Series Temperature Controls, read the full model number, since it identifies the range, differential type, and sensing element style.
Then confirm switching and mounting. The series uses SPDT snap acting switches, so verify load and wiring requirements in the manufacturer's data sheet before ordering. The series is unaffected by barometric pressure and cross ambient conditions, but the enclosure and sensing element style still need to suit the mounting location. Check each SupplyHouse product page for the exact model details and ask the SupplyHouse team when a replacement is unclear. Keep the full model number from the nameplate on file for reorders.
Frequently Asked Questions
What is an A28 Series temperature control?
A28 Series Temperature Controls are two stage controls from Johnson Controls with a liquid filled sensing element. They use SPDT snap acting switches and suit temperature sensing applications that need two stage control of HVAC/R equipment.
What temperature ranges do A28 controls cover?
Range depends on the model. The A28AA-37C covers 60°F to 140°F, the A28AA-36C covers 40°F to 90°F, and the A28AA-29C covers minus 30°F to 100°F. Check the full model number before ordering A28 Series Temperature Controls.
Do A28 controls have an adjustable differential?
The A28AA-29C and A28AA-36C are listed with an adjustable interstage differential. The A28 Series is also described as holding a constant differential throughout the entire range. Verify which differential behavior the application needs before picking a model.
Are A28 controls affected by barometric pressure or ambient swings?
A28 Series Temperature Controls are unaffected by changes in barometric pressure and cross ambient conditions, according to the SupplyHouse product information. The liquid filled sensing element and compact enclosure are part of the design. Mounting location and sensing element style still need to suit the job.
What type of switches do A28 temperature controls use?
The A28 Series uses SPDT snap acting switches in a two stage control. Verify load and wiring requirements in the manufacturer's data sheet before connecting equipment.