Black Reducing Tees (Imported) are three-way pipe fittings that connect lines of two different sizes in a single piece. The listing includes Everflow and Bluefin tees in sizes such as 1/2" x 1/2" x 1/4", 3/4" x 3/4" x 1/2", and 3/8" x 3/8" x 1/8". The Everflow 1/2" x 1/4" x 1/2" tee is black malleable iron with female threaded connections, and its description states that it is 100% pressure tested before leaving the factory. Each product lists its three openings as a size triple, so reading the callout correctly is part of picking the right fitting. Contractors and installers who order by the full triple avoid mismatched outlets, extra trips to the counter, and delays on the job. Matching the fitting to the line sizes on the plan keeps a rough-in moving and gives the finished system fewer surprises.
Subcategories
Buying Guide
Start with the three sizes on the fitting, because a reducing tee is defined by its size triple. The catalog describes the Everflow 1/2" x 1/2" x 1/4" tee as reading side x side x middle, so the order of the numbers matters when a job calls for a specific outlet.
Next, confirm the connection and material. The Everflow 1/2" x 1/4" x 1/2" tee is black malleable iron with female threads, and its description cites ASTM and ANSI standards. Check the product page for the same detail on any other tee before treating it as a match.
Then compare brands and sizes. Everflow and Bluefin both appear on this listing, and the sizes include 3/8" x 3/8" x 1/8" and 3/4" x 3/4" x 1/2". Brand choice matters most when a job needs to match fittings already installed or a spec calls for a named manufacturer.
When shopping Black Reducing Tees (Imported), keep a written list of every size triple from the takeoff. Order the full list in one pass, and verify each triple against the plan before the crew starts threading. Note the brand next to each triple as well, so the order matches what the plan or inspector expects. Catching a wrong triple at order entry costs minutes, while catching it after assembly costs a tear-out.
Frequently Asked Questions
How do I read the size on Black Reducing Tees (Imported)?
Black Reducing Tees (Imported) list three sizes in a set order. The catalog describes one Everflow tee as reading side x side x middle, so a 1/2" x 1/2" x 1/4" tee has the 1/4" size in the middle. Check each product page to confirm the convention before ordering.
What is the Everflow 1/2" x 1/4" x 1/2" black reducing tee made of?
The Everflow 1/2" x 1/4" x 1/2" black reducing tee is listed as black malleable iron with female threaded connections. Its description adds that it meets or exceeds all applicable ASTM and ANSI standards and is 100% pressure tested before leaving the factory. Confirm the material of any other black reducing tee on its own product page.
Which brands are listed under black reducing tees?
The Black Reducing Tees (Imported) listing includes Everflow and Bluefin products. Examples are an Everflow 1/2" x 1/2" x 1/4" tee and a Bluefin 3/4" x 3/4" x 1/2" tee. Brand and size vary by product, so check the exact item before ordering.
Is a 1/2" x 1/4" x 1/2" tee the same as a 1/2" x 1/2" x 1/4" tee?
No. Black reducing tees are defined by the full size triple, and the order of the numbers changes the fitting. The listing includes a 1/2" x 1/2" x 1/4" tee from Everflow and a 1/2" x 1/4" x 1/2" tee from both Everflow and Bluefin.
What is the smallest black reducing tee on the listing?
The smallest size in the catalog sample for Black Reducing Tees (Imported) is the Bluefin 3/8" x 3/8" x 1/8" tee. Other sizes in the sample step up to 1/2" and 3/4" configurations. Check the listing for other sizes before ordering.