Bradford White Lowboy Energy Saver Water Heaters are electric storage tank units built with a shorter, wider profile that fits under counters and inside closets where a standard tall tank won't clear the ceiling. Every model uses 3/4 inch NPT connections for both water and electrical hookups, and tanks are certified to a 300 psi test pressure with a 150 psi working pressure rating. A cold water inlet sediment reducing device cuts down on sediment buildup inside the tank while improving first hour hot water delivery, and a fast-acting surface mount thermostat pairs with a manual reset energy cutoff to guard against overheating. Standard residential models above 20 gallons meet or exceed Department of Energy and ASHRAE 90.1 efficiency requirements. Bradford White backs the line with 6 or 10 year limited warranty options on both the tank and component parts, depending on the model selected. Plumbers spec the Lowboy line specifically for apartment units, mobile homes, and tight mechanical closets where a full height water heater simply won't fit.
Subcategories
Buying Guide
Start with the physical footprint of the installation space, since the entire point of choosing Bradford White Lowboy Energy Saver Water Heaters over a standard tall tank is clearance under a counter, inside a short closet, or below a low ceiling. Measure the available height before ordering, since the low-profile design trades vertical clearance for a wider tank diameter that still needs adequate floor space. Match tank capacity to actual household or facility demand rather than defaulting to the smallest available size; a 28-gallon tank suits a single occupant or small apartment, while a 38-gallon tank handles a small family or two-bathroom household with more simultaneous hot water draw. Confirm the working pressure rating on the water supply against the tank's 150 psi rating before installation, particularly in buildings on municipal systems with higher static pressure. Verify the connection size matches existing plumbing, since these tanks use 3/4 inch NPT fittings for both water and electrical hookups. For commercial or light-duty applications like break rooms or small offices, check the dedicated commercial spec sheet rather than assuming residential ratings apply, since duty cycle and recovery differ from the residential line. Factor warranty length into the purchase decision, since Bradford White offers both 6-year and 10-year limited warranty tiers on tank and component parts depending on the specific model chosen.
Frequently Asked Questions
What makes a Lowboy water heater different from a standard tank?
A Lowboy water heater uses a shorter, wider tank profile instead of the tall cylindrical shape found on standard units, which lets it fit under counters, inside short closets, or below low ceilings. Bradford White Lowboy Energy Saver Water Heaters carry the same 3/4 inch NPT connections and pressure ratings as the company's standard electric tanks. The tradeoff for the shorter height is a larger footprint, so floor space still needs to be confirmed before installation.
What gallon capacities are available in the Lowboy Energy Saver line?
Residential Lowboy Energy Saver models are available in capacities including 28 gallons and 38 gallons, covering single occupants up through small families. Light-duty commercial versions extend the same low-profile design to higher-demand spaces like small offices or break rooms. Selecting the right capacity depends on the number of occupants and typical simultaneous hot water draw at the property.
What pressure rating do these tanks carry?
Bradford White Lowboy Energy Saver tanks are certified to a 300 psi test pressure with a 150 psi working pressure rating. Checking incoming water pressure against the 150 psi working rating matters on municipal systems that run higher static pressure. A pressure reducing valve upstream of the tank is worth confirming if supply pressure runs close to that limit.
What warranty comes with a Lowboy Energy Saver water heater?
Bradford White backs the Lowboy Energy Saver line with either a 6-year or 10-year limited warranty on the tank and component parts, depending on the specific model. Warranty length is one factor worth weighing against upfront cost when comparing models for a given job. Confirming the exact warranty tier on the spec sheet for the model being ordered avoids a surprise during a future warranty claim.
Do these water heaters include any built-in protection against overheating or sediment buildup?
Each Lowboy Energy Saver model includes a fast-acting surface mount thermostat paired with a manual reset energy cutoff that shuts the unit down if it overheats. A cold water inlet sediment reducing device also limits sediment accumulation inside the tank while improving first hour hot water delivery. Both features are standard across the line rather than optional upgrades.