Contactor, 24V Coil 25 Amp, HN51KB024

Relatively mechanically inclined, but HVAC, not so much. Being able to replace with exact switch provided a great deal of comfort. simply switched out wires from original to new and heat pump was good to go. Saved a good deal of money on service call out and markup on switch.

They had the right part and a good price which was a factory part and had it shipped to me in few days. This is the fourth time I ordered parts from them.won,t go no were else. They got my business .

I installed this several weeks ago to replace the old but still working original contactor as preventative maintenance. Although it looks a little different than the original, it was an easy installation with no modifications required. After many hot days of switching off & on no issues to date.

Carefull with this contactor ,in my case i had a different contactor in my AC unit , my thermostat feed went into a LOGIC Circuit board ,so my wiring diagram had to be as follows ,The Violet wire from the Logic board went to one side of the winding for the contactor and the Brown and Black wires went to the other side of the winding , it seems this puts a time delay in to protect the compressor from quick cycling ,so this is just to inform you people who replace the contactor yourself , this is a well made unit with solid contacts . so take a photo of the wiring before you do the swap and good

Worked just like the original. Faster delivery would have been appreciated.

My Carrier AC condenser fan would shut off. Problem was contactor switch points welded themselves together. Ordered replacement contactor switch, and received it in two days. It was an exact replacement and I installed it with no problems in about 15 minutes. AC now works fine.

Condenser coil from 1997 was running on the original contactor. Felt that it would be good to just replace it (and the capacitor, which itself was over ten years old) with new so there'd be one less part to contend with wearing out on a hot day and have to be at the mercy of an HVAC technician. For the price, it was a no-brainer. Installation was straight-forward, even for a complete novice. Supply House ships these parts very quickly, and their prices are slightly less than similar sites, even with shipping.

Replaced the original (circa 1998) contactor on my Carrier condenser just because. I already replaced the original run capacitor, so the contactor was the next logical choice. Installation was pretty straight forward, even for a novice.

I replaced the old contactor because it was arching and sticking. This part fit perfectly in place and works great. The tab connectors were slightly different, but not did not cause an issue.

Works great........great service....speedy delivery.