Compression x MIP Elbows are brass elbows that join a compression connection to a MIP thread. The catalog sample includes Bluefin and Jones Stephens models, and each is listed as lead free. Sizes are written as OD x MIP, such as 1/4-inch OD x 1/8-inch MIP and 3/8-inch OD x 3/8-inch MIP. The Bluefin models in the sample list brass alloy C6802. Contractors use these elbows to turn a line and finish on a threaded connection in one fitting, which can remove the need for a separate adapter. The OD size and the MIP size are listed separately, so a fitting that matches only one of them will not fit the job. Reading both numbers before ordering saves a return trip and keeps the install on schedule.
Subcategories
Buying Guide
Start with the two sizes. Every elbow in the catalog sample lists an OD size and a MIP size, such as 1/4-inch OD x 3/8-inch MIP or 3/8-inch OD x 1/4-inch MIP. Match the OD to the compression side of the connection and the MIP size to the threaded port before looking at anything else.
Next, compare brands and models. The sample includes Bluefin and Jones Stephens elbows, including Jones Stephens models 69-44, 69-46, and 69-64. Model numbers and size designations are the safest way to match a fitting to a parts list or a previous install.
Then check material and lead status. Compression x MIP Elbows in the sample are brass and lead free, and the Bluefin models list brass alloy C6802. Verify those details on the exact model before ordering, because the sample does not show that every product on the page shares one specification.
Last, think about the whole connection. A single elbow can turn the line and end on a threaded port, which cuts the number of joints to make and to inspect later. Confirm the thread size on the port and the OD of the line on the job before committing to an order. A wrong size means a return trip.
Frequently Asked Questions
What does OD x MIP mean on a compression elbow?
On the compression x MIP elbows in the catalog sample, the first size is the OD and the second is the MIP thread size. For example, a 3/8-inch OD x 1/4-inch MIP elbow pairs a 3/8-inch OD with a 1/4-inch MIP thread. Read both numbers before ordering.
Are compression x MIP elbows lead free?
The Bluefin and Jones Stephens compression x MIP elbows in the catalog sample are each listed as lead free. The sample is not the full assortment, so verify the listing on the exact model. Brass is the material named in the product names.
What brass alloy do Bluefin compression x MIP elbows use?
The Bluefin compression x MIP elbows in the catalog sample list brass alloy C6802. The alloy appears on the 1/4-inch OD x 1/8-inch MIP and 3/8-inch OD x 3/8-inch MIP models in the sample. Check the exact product page for other models.
Which sizes are listed for compression x MIP elbows?
The catalog sample for compression x MIP elbows lists 1/4-inch OD x 1/8-inch MIP, 1/4-inch OD x 1/4-inch MIP, 1/4-inch OD x 3/8-inch MIP, 3/8-inch OD x 1/4-inch MIP, and 3/8-inch OD x 3/8-inch MIP. The sample does not show every size on the page. Check the listing for the exact size.
Can one compression x MIP elbow replace an elbow and an adapter?
A compression x MIP elbow joins a compression connection to a MIP thread in one body, so it can take the place of a separate elbow and adapter. Using one fitting removes a joint from the assembly. Confirm the OD and the MIP size against the job before ordering.