Defrost controls are the boards and modules that manage heat pump defrost cycles and related outdoor unit control in HVAC systems. The ICM-UDEFROST Universal Defrost Control Board, for example, replaces the function of nearly all time and temperature heat pump defrost controls, and it monitors thermostat calls for Y, O/B and W2 inputs. Another listed control, the ICM334 Low Ambient 3-Phase Head Pressure Control, is rated for 208 to 600 VAC at 50 to 60 Hz. Contractors turn to these parts when OEM replacement boards are costly or hard to get, or when a system needs head pressure control in low ambient conditions. Matching the control to the system's voltage, thermostat inputs and operating conditions keeps a repair on track and cuts the odds of a return trip.
Subcategories
Buying Guide
Start with the function the system needs. A board that replaces a failed OEM defrost part has a different job than a head pressure control for cold weather operation, so confirm what failed before ordering. For heat pump defrost repairs, a universal board such as the ICM-UDEFROST replaces the function of nearly all time and temperature defrost controls and monitors Y, O/B and W2 thermostat inputs. Check that the existing system uses those inputs before committing to a universal replacement.
Second, match the electrical ratings. The ICM334 lists 208 to 600 VAC, 50 to 60 Hz and an 18 to 30 VAC control voltage, so verify line voltage, frequency and the control circuit against the equipment nameplate and wiring diagram. The ICM334 is a 3-phase control, so confirm the equipment's phase as well.
Consider the operating environment. Outdoor controls face wide temperature swings, and the ICM334 is listed for an operating range of minus 40 to 140 degrees F. Compare that range with the climate where the equipment runs.
When shopping Defrost Controls, factor in configuration time. The ICM-UDEFROST is configured through the free ICM OMNI mobile app, and ICM describes that configuration as easy. Keep the manufacturer's instructions and the old board's wiring notes handy, and photograph terminal connections before removing the failed part.
Frequently Asked Questions
What do defrost controls do on a heat pump?
Defrost controls manage heat pump defrost cycles using time and temperature logic. The ICM-UDEFROST board monitors thermostat calls for Y, O/B and W2 inputs. It replaces the function of nearly all time and temperature heat pump defrost controls.
Can a universal defrost control board replace an OEM board?
Often, since the ICM-UDEFROST replaces the function of nearly all time and temperature heat pump defrost controls. ICM points to the high cost and limited access to OEM replacement boards as the reason for a universal option. Confirm the system's thermostat inputs before swapping defrost controls.
How do I configure the ICM-UDEFROST?
The ICM-UDEFROST defrost control board is configured through the ICM OMNI mobile app, which is free for Apple and Android devices. Follow the manufacturer's instructions for the specific settings the system needs.
What voltage does the ICM334 head pressure control use?
The ICM334 Low Ambient 3-Phase Head Pressure Control is rated for 208 to 600 VAC at 50 to 60 Hz. Its control voltage is 18 to 30 VAC. Verify those ratings against the equipment before wiring this control.
What temperature range is the ICM334 rated for?
Among the defrost controls listed, the ICM334 has an operating temperature range of minus 40 to 140 degrees F. Confirm the installed location stays within that range before specifying the control.