Fantech's MGE Metal Exhaust Grille w/ white powder coat finish. A low profile, adjustable intake/exhaust circular grille. Included with the grille is a matching diameter galvanized mounting collar with nailing strip.
My second time around trying to finish up an external exhaust project for a smoking room. This worked perfectly for me. I had it on before my installer even came by to finish the trim for me. Only problem I found, and I think it's due to the high velocity of the centrifugal fan I am using, when its on high and the grill is adjusted very close inward it whistles. On this model a plate rotates inward and outward to maximize or minimize the opening and on high you can hear a whistling. It's quite O.K. with me, for all the rest of the time and with the fan on a lower setting, it performs great and the price for two pieces: the collar and grill, is a dream.
VS
Most Liked Negative Review
quality product
used to vent bathroom fan. quality product but needs a better mounting assembly for sheetrock installation between 2 by 10 studs in attic. be aware you may have to design your own mounting bracket.
Showing 1-10 of 22 reviews
This is a great quality product. Easy to install and has an
We used this for our return air from an ERV. It is a nice subtle vent and looks good with the recessed lighting we used. Both are the same size so the ceiling is clean looking. Only thing I want to do is paint them to match the lighting.
weekend warrior
essex MA
15 days ago
Verified Buyer
Was this review helpful to you?
I would buy their products again and again.
Fantastic company! Shipping always as expected on time as stated. Parts and materials exactly as stated. Would recommend to anyone. Thanks Supply House keep up the great work!.
Tom Friend
Indiana
1 years ago
Verified Buyer
Was this review helpful to you?
Solid quality
So happy and impressed with this, and fantech products in general. My Supply house experience and their customer support is OUTSTANDING. My order was short one of these grilles; I wrote a simple email and this part was shipped same day FOC, no questions asked.
Dave
Meeker CO
2 years ago
Verified Buyer
Was this review helpful to you?
Excellent product- recommend
Well built and great looking. Finish looks like enamel or even enameled ceramic, though it is metal. Easy to adjust
Timmy
Philadelphia
2 years ago
Verified Buyer
Was this review helpful to you?
Do people understand that these are adjustable dampers too?
Clean look, dead easy to install, and adjustable damping. I wonder if the folks specifying these take their damping function into account when ALSO requiring iris dampers in line in the ducts! It would also be great to have a locking nut in there to prevent tenants etc. from unbalancing the HVAC by fiddling with it ad-hoc...
Dr. X
Brooklyn
2 years ago
Verified Buyer
Was this review helpful to you?
Not using it.
I ordered this but then decided against it since the collar does not screw into the ceiling like its competitors. I would like to return it but the shipping cost is just as expensive as the product so basically a mistake.
Z
San Jose, CA
2 years ago
Verified Buyer
Was this review helpful to you?
I would definitely buy this product again.
I have not installed it yet but opening up the box it was far nicer than I was expecting.
ted
Massachusetts
4 years ago
Verified Buyer
Was this review helpful to you?
Barely noticeable
I bought a couple of these for my ERV. Very easy to install from the attic and hardly noticeable placed in the corner of the rooms.
Tim
Maine
4 years ago
Was this review helpful to you?
fast shipping /exactly the replacement I needed
Great service. Fast shipping
cas
seattle wa
4 years ago
Verified Buyer
Was this review helpful to you?
Product worked for my application.
Color was off white enough to not match other "white" elements in the space but that is not a defect. We did not need or use the 4" collars that came with the diffusers so they were unnecessary added expense. Also, the collars banged on the diffusers so they were chipped in shipping.
They did meet our need for a finishing treatment that could be applied to a raw 4" duct terminated at the ceiling. They were quick and easy to install and I would use them again if faced with a similar need.
Q: How far does this grill cover protrude from wall?
Asked by Lyn 10 years ago
Add your answer
Verified Reply- SupplyHouse Staff
The cover ring is 5/8" thick, the center piece sticks out slightly more.
Was this review helpful to you?
Q: Fantech mod mge4 does this fit standard 4 inch galvanized duct?
Asked by P H 11 years ago
Add your answer
Verified Reply- Supplyhouse Staff
It should fit.
Was this review helpful to you?
Free Shipping
On orders over $99
We offer flexible shipping and scheduling options, up-to-date delivery estimates, and free ground shipping on any order over $99 to make sure your order gets to you on-time, for less.
Ordered the wrong product? Item damaged in transit? Our 3-step process makes returning products easy – even up to a year after purchase – with no restocking fees on returns made within 90 days.