Beckett Oil Burner AirBoot Kit (2.0 GPH)

Works well, easy to install, exactly what I was looking for! Shipped pretty quickly too. Hope it last.

I use this product to meet code regulations in my area. When they work, they work great. I've installed at least 50 of these and I've noticed a couple different issues. Sometimes the thru-hole is too tight, I have to grind the hole bigger to fit onto the pump. I've noticed this more on the new Beckett oil pumps. Please make the hole bigger! And another issue I've had is the air adjust assembly gets loose. There have been a few nightmare times trying to get the whole assembly together and the shaft is just a press fit/rivet type deal and you have to seriously mess with it to get it to hold reliably. If there were another option on the market I would try it but for the meantime I will continue to use these and deal with the problems as they arise.

awesome website and handy for the home doit yourselfffers

Hopefully this may help somebody: if the air adjustment isn't working correctly, try pushing the pin in the center of the adjustment circle tighter. I have put in many of these, they usually are in working order.

Easy to install, also Beckett has an online doc that's a little more detailed if you need it. Also, this will reduce the negative pressure in the basement by getting supply air directly from the outside. Reduced radon level by almost 50% and keeps the basement warmer.

The product is awaiting installation. All necessary parts are present.

Arrived in time. Packaging is perfect. Condition brand new, with all necessary components and manual.

We used this to get fresh air to our boiler in the basement. After finishing the basement, we reduced the boiler room down below minimum and did not want to vent to the heated space in the finished basement. I did the research and talked to a few HVAC guys as well as the local supply house. This is the product of choice, make sure you get the model that matches your burner. I had an installer install the boot and I did the rest. If you're comfortable dissambling your burner, it is not very difficult to install. It does it's job getting fresh air to the boiler without sacrificing any room air with the orifice opened only 28 degrees!

This is a great idea for people who have finished basements. After a puff back, I had a local dealer install the kit. I cant believe how much air the boiler now is able to use for combustion.