Flare x FIP Couplings connect a flare end to a female iron pipe (FIP) thread in one fitting. The Jones Stephens versions are brass and include a 3/8 inch flare x 1/4 inch FIP coupling (F40047), a 3/4 inch flare x 1/2 inch FIP coupling (F40102), and a 3/4 inch flare x 3/4 inch FIP coupling (F40103). Contractors use Flare x FIP couplings where a flared connection has to meet a threaded iron pipe fitting. Both the flare size and the FIP size are specified in the product name, and they do not always match, as the 3/4 inch by 1/2 inch F40102 shows. Getting both sizes right is the difference between a clean connection and a second trip for the right part. Pressure ratings are not listed on the Jones Stephens product pages, so the application and code approval should be confirmed with the manufacturer before specifying.
Subcategories
Buying Guide
Start with the two sizes. A flare x FIP coupling has a flare size and an FIP thread size, and the product name lists both. Jones Stephens lists the F40047 as 3/8 inch by 1/4 inch, the F40102 as 3/4 inch by 1/2 inch, and the F40103 as 3/4 inch by 3/4 inch. Measure or read the size of the part at both ends of the joint before choosing.
When comparing Flare x FIP Couplings, check the material and the application. The Jones Stephens couplings reviewed here are brass. Their product pages do not list a pressure rating or a restricted application, so confirm the rating, the approved use, and local code with the manufacturer before the fitting goes on a gas, water, or refrigerant line.
Check the listings and warnings next. The F40047, F40102, and F40103 pages each show CEC Listed as No and MASS Approved as No, and each carries a Proposition 65 warning for cancer and reproductive harm. Jobs that require those approvals need a different fitting.
Last, think about the count and the mix. Reducer sizes like the F40047 and F40102 are easy to confuse with an equal-size coupling like the F40103 on a parts list, so label the sizes on the order. Matching each coupling to the job prevents a second trip.
Frequently Asked Questions
What does FIP mean on a flare x FIP coupling?
FIP stands for Female Iron Pipe. On a Flare x FIP coupling, one end is a flare connection and the other is a female threaded iron pipe connection. The Jones Stephens F40103, for example, is a 3/4 inch flare x 3/4 inch FIP brass coupling.
What sizes do Jones Stephens flare x FIP couplings come in?
Jones Stephens Flare x FIP couplings include 3/8 inch x 1/4 inch (F40047), 3/4 inch x 1/2 inch (F40102), 3/4 inch x 3/4 inch (F40103), 1/4 inch x 1/2 inch (F40118), and 1/2 inch x 3/4 inch (F40054). Flare x FIP couplings list the flare size first and the FIP size second.
Are flare x FIP couplings made of brass?
The Jones Stephens Flare x FIP couplings F40047, F40102, and F40103 are brass. Brass construction is listed on each product page. Check with the manufacturer for any application limits beyond the material.
Do flare x FIP couplings list a pressure rating?
The Jones Stephens product pages for the F40047, F40102, and F40103 do not list a pressure rating. Before specifying a Flare x FIP coupling for a gas, water, or refrigerant line, confirm the rating and approved use with the manufacturer. Local code decides what is allowed on the job.
Can I use a flare x FIP coupling to change sizes?
Some Flare x FIP couplings have two different sizes, such as the F40047 (3/8 inch flare x 1/4 inch FIP) and the F40102 (3/4 inch flare x 1/2 inch FIP). Match the flare size to the flared part and the FIP size to the threaded part. Confirm both sizes before ordering.