Flare x FIP Elbows are brass elbow fittings that pair a flare connection on one end with an FIP connection on the other. The listing includes Jones Stephens and Bluefin elbows, with size pairs such as 1/4 inch flare by 1/4 inch FIP and 3/8 inch flare by 1/2 inch FIP. The Bluefin 3/8 inch flare by 1/2 inch FIP elbow is listed with flare and threaded connections for plumbing applications. Installers use these elbows to join flare tubing to a threaded connection where the run has to turn. Because the flare size and the FIP size can differ on one fitting, as they do on the 3/8 inch flare by 1/4 inch FIP elbow, both ends need to match the tubing and the connection point. A wrong size pair means a return trip, so reading both sizes before ordering saves time.
Subcategories
Buying Guide
Start with the size pair. Elbows in this category are named by flare size first and FIP size second, and the two numbers do not have to match. Listed combinations include 1/4 inch by 1/4 inch, 1/4 inch by 3/8 inch, 3/8 inch by 1/4 inch, and 3/8 inch by 1/2 inch. Confirm the tubing size for the flare end and the port size for the FIP end before anything goes in the cart.
Next, check material and connection type. The listed brass elbows carry flare and FIP connections, and the Bluefin 3/8 inch flare by 1/2 inch FIP elbow is listed for plumbing applications with flare and threaded connections. For refrigerant, gas, or any other service, check system requirements and local code before choosing a fitting, since the listing does not state an approved service.
When comparing brands, match the exact size pair first. Jones Stephens and Bluefin each list a 3/8 inch flare by 1/2 inch FIP brass elbow, so the choice often depends on part number and crew preference. Flare x FIP Elbows work best when the run layout is settled. Measure the turn, confirm clearance around the threaded port, and order the exact size pair for each connection. On jobs with mixed sizes, keep a short written list of flare and FIP sizes so nothing gets swapped at the point of install.
Frequently Asked Questions
What does Flare x FIP mean on an elbow?
A Flare x FIP elbow has a flare connection on one end and an FIP connection on the other. The first size listed is the flare end and the second is the FIP end, as in the 3/8 inch flare by 1/2 inch FIP brass elbow. Both numbers are listed separately because they can differ.
Can the flare size and FIP size be different on one elbow?
Yes. Flare x FIP Elbows come in mixed size pairs, such as the Jones Stephens 50-46 with a 1/4 inch flare end and a 3/8 inch FIP end. The Jones Stephens 50-64 reverses that pair with a 3/8 inch flare end and a 1/4 inch FIP end.
Are Flare x FIP Elbows brass?
The Jones Stephens and Bluefin Flare x FIP Elbows on this page are named or listed as brass. The Bluefin 3/8 inch flare by 1/2 inch FIP elbow lists brass as its material, and the Jones Stephens elbows are named as brass elbows. Check the product page for material on any other size.
Which brands make the Flare x FIP Elbows on this page?
Jones Stephens and Bluefin both have Flare x FIP Elbows in this category. Jones Stephens models include the 50-44, 50-46, 50-64, and 50-68, and Bluefin lists a 3/8 inch flare by 1/2 inch FIP elbow.
What elbow do I need to connect 3/8 inch flare tubing to a 1/2 inch FIP port?
A 3/8 inch flare by 1/2 inch FIP elbow matches that pair. Both the Jones Stephens 50-68 and the Bluefin elbow are listed in that size. Confirm the tubing and port sizes on the job before ordering Flare x FIP Elbows.