Flow Center Products manufactures pressurized flowcenters, the pump modules that circulate water or antifreeze through a geothermal ground loop and into a heat pump system. The company operates out of Crawfordsville, Indiana. It works as an OEM, assembling flowcenters and replacement pumps for the geothermal HVAC market rather than the boiler or standard hydronic market. Flow Center Products sells through a distributor and contractor network, with pricing tiers set up specifically for trade accounts.
Product Lines
Flow Center Products builds its pressurized flowcenters around three pump brands: Grundfos, WILO, and Bell & Gossett. Grundfos includes six pump models plus dedicated MAKO Series flowcenter options. Across the line, there are nine replacement pump configurations. Beyond the pump modules, the company sells hose kits, flush and fill valves, and check, zone, and ball valves. It also sells pressure boosting tools, plus brass and HDPE fittings for connecting a flowcenter into a ground loop. Socket fusion tools and measuring tools round out the accessory catalog for contractors fusing HDPE pipe on site.
Why Contractors Specify FlowCenter Products
Geothermal installers specify Flow Center Products because the flowcenters come pre-assembled around name-brand circulator pumps from Grundfos, WILO, and Bell & Gossett. Contractors don't need to source individual pumps, valves, and fittings, then plumb them into the loop separately. Nine pump configurations across those three brands let a contractor match a flowcenter to the pump family a job already specs. That avoids switching brands mid-project. The accessory lineup (hose kits, flush and fill valves, and fusion tools) covers most of what a loop installation needs from one supplier.
How to Choose FlowCenter Products
Pump brand is usually the starting point. A contractor already running Grundfos pumps on other equipment might standardize on Flow Center Products' Grundfos-based flowcenters for the same parts compatibility. A Bell & Gossett or WILO shop can do the same with those pump lines. System pressure and loop length also factor in. A pressurized flowcenter needs a pump sized to overcome the actual head loss in the ground loop, not a generic rating. For the fitting side of the install, choosing between brass and HDPE fittings depends on whether the loop connections are fused or threaded. Socket fusion tools only matter if HDPE fusion is part of the job.
Frequently Asked Questions
What does Flow Center Products manufacture?
Flow Center Products builds pressurized flowcenters, the pump modules that circulate fluid through a geothermal ground loop and into a heat pump.
Where is Flow Center Products located?
The company operates out of Crawfordsville, Indiana, as an OEM focused on the geothermal HVAC market.
Which pump brands does Flow Center Products use in its flowcenters?
Flow Center Products builds its flowcenters around Grundfos, WILO, and Bell & Gossett pumps, offering nine replacement pump configurations across those three brands.
What accessories does Flow Center Products sell alongside its flowcenters?
The accessory catalog includes hose kits, flush and fill valves, and check, zone, and ball valves. It also includes pressure boosting tools, measuring tools, socket fusion tools, and brass and HDPE fittings.
How does Flow Center Products price its products?
Flow Center Products sells through a distributor and contractor network. Its pricing tiers are set up specifically for trade accounts.