Galvanized Caps (Imported) are galvanized malleable iron caps that close off the end of a threaded pipe or fitting. The category includes Everflow caps in 1/8 inch, 1/4 inch, and 2-1/2 inch sizes and Bluefin caps in 1-1/4 inch and 2 inch sizes. The Everflow 1/8 inch and 1/4 inch listings describe 150# malleable iron fittings that meet or exceed applicable ASTM and ANSI standards and are 100% pressure tested before leaving the factory. The 2-1/2 inch Everflow cap lists a threaded female connection. Each listed cap carries a galvanized material designation, so the finish is clear at a glance. Contractors use caps to terminate a line or seal a branch. Matching size, material, and pressure class to the system keeps a capped line tight and avoids rework.
Subcategories
Buying Guide
Start with the pipe size. The listings include 1/8 inch, 1/4 inch, 1-1/4 inch, 2 inch, and 2-1/2 inch caps, and each size has to match the nominal size of the fitting or pipe being capped. Measure or read the existing line before choosing. A cap one size off will not thread correctly, so a quick check saves a return trip.
Next, confirm the thread. The Everflow 2-1/2 inch cap is listed as a female threaded connection, which suits a male threaded pipe end. Verify the thread type on any other size before ordering.
Then look at the pressure class and standards. The Everflow 1/8 inch and 1/4 inch listings describe 150# fittings that meet or exceed applicable ASTM and ANSI standards and are 100% pressure tested before leaving the factory. The 2-1/2 inch Everflow listing carries the same standards and testing language. Among Galvanized Caps (Imported), the Bluefin listings state size and galvanized material only, so confirm pressure class on the product page when a job specifies it.
Finally, consider brand and the job spec. Everflow and Bluefin caps both list galvanized material, so brand choice often follows what the spec or the existing line calls for. Verify the service conditions for the line being capped before ordering. Keep the product listing handy for the purchase order so the size, brand, and material are documented.
Frequently Asked Questions
What sizes of galvanized malleable caps are listed?
Galvanized Caps (Imported) in the catalog include Everflow 1/8 inch, 1/4 inch, and 2-1/2 inch caps and Bluefin 1-1/4 inch and 2 inch caps. Other sizes may be listed, so check the category for the size needed.
Are Everflow galvanized caps pressure tested?
The Everflow 1/8 inch, 1/4 inch, and 2-1/2 inch listings in Galvanized Caps (Imported) state the caps are 100% pressure tested before leaving the factory. They also state the caps meet or exceed applicable ASTM and ANSI standards.
Which galvanized caps are 150# malleable iron?
The Everflow 1/8 inch and 1/4 inch caps in Galvanized Caps (Imported) are described as 150# black and galvanized malleable iron fittings. Both list galvanized as the material. Check the listing for the pressure class of other sizes.
Do the galvanized caps have female threads?
The Everflow 2-1/2 inch galvanized cap in Galvanized Caps (Imported) is listed with a threaded connection and female thread type. Thread details for other sizes aren't stated in the catalog records, so confirm on the product page.
Which brands make the 1-1/4 inch and 2 inch galvanized caps?
Bluefin makes the 1-1/4 inch and 2 inch galvanized malleable caps listed in Galvanized Caps (Imported). Both list galvanized as the material. Everflow makes the 1/8 inch, 1/4 inch, and 2-1/2 inch caps.