Holdrite RAPID System is a line of pipe supports built around a galvanized steel bracket and a sound-rated clamp for CTS tubing. The 170-251 pairs an 18 inch by 5/8 inch galvanized steel 90 degree bracket with a polypropylene variable closure clamp, and it supports tubing as large as 1 inch CTS. SupplyHouse lists the 170-251-18 as a bulk pack with 50 brackets and 100 clamps, and the 170-18 as a galvanized steel bracket. The 251 is listed as a RAPID System clamp. Brackets and clamps are listed as separate parts as well as in the bulk pack. The 170-251 carries cUL and UL Listed approvals. Choosing a bracket and clamp that match the tubing size and the pack quantity keeps rough-in work organized and the support layout consistent from fixture to fixture on the job.
Subcategories
Buying Guide
Start with the tubing size. Tubing size drives the rest of the selection. The 251 clamp supports tubing as large as 1 inch CTS, so confirm the tube diameter before choosing a bracket and clamp set.
Next, decide on pack size. The 170-18 is listed as a galvanized steel bracket, while the 170-251-18 is a bulk pack with 50 brackets and 100 clamps. Single brackets suit small repairs, and bulk packs suit larger rough-ins where the clamp count matters.
Holdrite RAPID System clamps are sound-rated and made of polypropylene, so check that rating against the project specification when tube noise is a concern. Pair the clamp with a bracket from the same RAPID System, as the 170-251 kit does. The 170-251 carries cUL and UL Listed approvals, which helps when an inspector asks for listed supports.
Then check bracket dimensions against the framing space. The 170-251 bracket measures 18 inches by 5/8 inches, so confirm the length and width against the space provided for the support. Read the model number on each listing before ordering.
Last, plan quantities by counting support points. Each bracket in the 170-251-18 bulk pack comes with two clamps, since the pack holds 50 brackets and 100 clamps. Add spare sets for layout changes so the crew is not stopped mid-job.
Frequently Asked Questions
What comes in the Holdrite 170-251-18 RAPID System bulk pack?
The Holdrite 170-251-18 RAPID System bulk pack includes 50 galvanized steel brackets and 100 clamps. The bracket in the 170-251 kit measures 18 inches by 5/8 inches. The count works out to two clamps per bracket.
What tubing size does the RAPID System clamp fit?
The Holdrite 251 RAPID System clamp supports tubing as large as 1 inch CTS. It is a sound-rated polypropylene variable closure clamp. Confirm the tube diameter before ordering.
What is the Holdrite RAPID System bracket made of?
Holdrite RAPID System brackets such as the 170-18 are galvanized steel. The 170-251 kit uses a 90 degree galvanized steel bracket that measures 18 inches by 5/8 inches. Its clamp is polypropylene.
Are Holdrite RAPID System supports listed?
The Holdrite 170-251 is cUL and UL Listed according to Holdrite. Approvals are tied to the model, so check the listing for any other RAPID System part before installing it.
What is the difference between the 170-18 and the 170-251-18?
SupplyHouse lists the 170-18 as a RAPID System galvanized steel bracket and the 170-251-18 as a bulk pack with 50 brackets and 100 clamps. Holdrite RAPID System buyers who need clamps with the brackets should look at the bulk pack or the 251 clamp.