Inducer Assembly, 56W68

The technician was very friendly, knowledgeable, and helpful. Quickly determined the part that I needed and processed the transaction. Great service!

I received great customer support and the part fix perfectly.

The induction blower was the perfect fit and came with the gasket ready for installation. Quick delivery also!

Great quality, basically identical to the original. Be sure to remove all debris and left over gasket. The original part degraded to a rusty contained mess inside the fan housing. While open, doesn't hurt to take a peek at the heat exchangers to observe wear. Thanks Supply House, another job done.

I ordered Fasco Type U21B Inducer for my Armstrong Air 80 Plus Gas Furnace and received it in two days. I installed the part and it fixed the error code flashing 3 lights (pressure switch) immediately. I had installed a new pressure switch but the error code still persisted. I looked at the schematic on the door and deduced it must be the inducer NOT creating enough pressure to activate the pressure switch. I checked this by starting a call to heat at the thermostat, and then waiting a bit, jumpered the pressure switch (to act like it turned on). I had a glow on the hot flame ignitor, and then gas was ignited and heat came on. I knew I had an old inducer that was not creating enough pressure (possibly the inducer motor was worn out) to activate pressure switch. I am very happy it fixed my problem. The inducer comes with a white fabric gasket, so I only put a thin bead of High Temp Red Sealant on the egdes. Order from Supplyhouse for your parts. They have good prices are shipped quickly and will fix your problem!