MegaPress 90° Street Elbows are Viega press-connection fittings that turn a steel pipe run 90 degrees, with one fitting end and one press end. The carbon steel model 4816.1 comes in six sizes from 1/2" to 2" and uses an EPDM sealing element with Smart Connect technology. Larger MegaPress XL street elbows, including 2-1/2" sizes, require MegaPress XL rings and a PressBooster actuator. Contractors and mechanical installers use them on commercial and industrial piping where a turn needs to land directly on another fitting. The line spans carbon steel bodies with EPDM or FKM sealing elements and 316 stainless steel bodies, so material and seal selection drives every order. Matching the elbow to the pipe, schedule and sealing element matters because a press joint only performs as designed when every component is correct.
Subcategories
Buying Guide
Start with the pipe material. Carbon steel pipe calls for the carbon steel fittings, and stainless steel pipe calls for the 316 stainless steel fittings. Model 4816.1 covers 1/2" through 2", while the XL models cover larger sizes such as 2-1/2", 3" and 4" and carry their own tooling requirements. Confirm the pipe schedule next. The 4816.1XL carbon steel elbow is made for Schedule 10 to Schedule 40 carbon steel pipe, and the 5116.1XL stainless steel elbow is made for Schedule 5 to Schedule 40 stainless steel pipe.
Check the sealing element against the system. Model 4816.1 and the 5116.1XL use EPDM, and the 4816.1XL uses FKM. Confirm the system media and operating conditions against Viega documentation before choosing a seal, because a press joint only performs as designed in the service it was built for.
Plan the tooling before the order. When specifying MegaPress 90° Street Elbows in XL sizes, confirm the crew has MegaPress XL rings and a PressBooster actuator, because the XL fittings require them.
Finish with a layout check. A street elbow has one fitting end and one press end, so the fitting end must mate with the component it lands on. Compare length L and dimension A against the space on the job. For model 4816.1, length L runs from 2.24" to 4.76" across the 1/2" to 2" sizes, and weight runs from 0.379 lb to 2.596 lb.
Frequently Asked Questions
What are MegaPress 90° street elbows used for?
MegaPress 90° Street Elbows turn a steel pipe run 90 degrees with one fitting end and one press end. Viega model 4816.1 is carbon steel with an EPDM sealing element, and model 5116.1XL is 316 stainless steel. Both are press connections that use Smart Connect technology.
What sizes does the carbon steel MegaPress 90° street elbow come in?
The carbon steel MegaPress 90° Street Elbow, model 4816.1, comes in 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2" sizes. Larger MegaPress XL street elbows cover sizes such as 2-1/2", 3" and 4". Check the exact model before ordering, since XL fittings use different tooling.
What pipe schedule do MegaPress XL street elbows work with?
The MegaPress XL 4816.1XL carbon steel street elbow is made for Schedule 10 to Schedule 40 carbon steel pipe. The 5116.1XL 316 stainless steel street elbow is made for Schedule 5 to Schedule 40 stainless steel pipe. Match the pipe type and schedule before pressing.
What tools do MegaPress XL street elbows need?
MegaPress XL 90° Street Elbows require MegaPress XL rings and a PressBooster actuator. The stainless steel 5116.1XL lists a PressBooster or Z3 actuator. Verify tooling against Viega instructions before the job.
Do MegaPress 90° street elbows use EPDM or FKM seals?
MegaPress 90° Street Elbows come with different sealing elements by model. Model 4816.1 and the stainless steel 5116.1XL use EPDM, and the carbon steel 4816.1XL uses FKM. Confirm the seal against the system media before selecting.