| Size: | 1" |
|---|---|
| Inlet Type: | Union FNPT |
| Outlet Type: | FNPT |
| Max Temp (F): | 180°F |
| Max Inlet Pressure: | 400 PSI |
| Pressure Range: | 15 to 75 psi |
| Min Pressure (PSI): | 15 |
| Max Pressure (PSI): | 75 |
| Material: | Cast Bronze |
| Lead Free: | Yes |
The NR3XL would be the replacement series. The connection size was not specified but that would be the series that replaces the NR3.
Yes model NR3XL is the direct replacement for the older model BR4.
the PSI range is 15-75, I do not see any that will go that low.
This Pressure Reducing Valve is factory preset for 50 PSI. There is an adjustment bolt on the unit. Multiple installations are recommended for wide demand variations or where the desired pressure reduction is more than 4 to 1 (ie: 200 psi inlet reduced to 50 psi outlet). CAUTION: Anytime a reducing valve is adjusted, a pressure gauge must be used downstream to verifycorrect pressure setting. Do not bottom the adjustment bolt on bell housing.