Apply to be a TradeMaster!
Filter menu expanded

Filters

2 items
Reset

SORT

Product Availability
–

Show In Stock Only (2)

Size
–

3/8" (2)
1/2" (1)
3/4" (1)

Polypropylene Spiral Barb Elbows

Help Face
Need a little help?
2 items
Grid
List
Compare
Product Image of 1/2" x 3/8" Polypropylene Spiral Barb 90° Elbow (MIPT x Spiral Barb)
1/2" x 3/8" Polypropylene Spiral Barb 90° Elbow (MIPT x Spiral Barb)
SKU: 1413-073
SKU: 1413-073
$1.11 each
BOX UP & SAVE 8%
$51.00 box of 50
$1.02 each
In Stock
Get 145 by Mon, Nov 23
In Stock
Get 145 by Mon, Nov 23
Compare
Product Image of 3/4" x 3/8" Polypropylene Spiral Barb 90° Elbow (MIPT x Spiral Barb)
$1.11 each
BOX UP & SAVE 8%
$51.00 box of 50
$1.02 each
In Stock
Get 133 by Mon, Nov 23
In Stock
Get 133 by Mon, Nov 23
Resources
FAQs, Manuals & Videos
Videos
Articles
More About Polypropylene Spiral Barb Elbows

Polypropylene Spiral Barb Elbows are 90 degree fittings that join a MIPT connection to a spiral barb connection. The Spears elbows in this category include 1/2" x 3/8" and 3/4" x 3/8" sizes, and each of those is made of polypropylene with NSF listed under standards met. The product description says Spears insert fittings are designed for use with ASTM D 2104 Schedule 40 or D 2239 SIDR pressure rated polyethylene pipe. A barbed elbow like this turns a polyethylene run 90 degrees and gives it a threaded connection point. Size and thread type decide whether a fitting works on a given job, so the product specs deserve a close read before the order goes in. Matching the elbow to the pipe standard and port size early avoids a return trip for a different fitting.

Subcategories

  • 1/2" x 3/8" Spiral Barb Elbows: The Spears 1/2" x 3/8" polypropylene spiral barb 90 degree elbow has a MIPT x spiral barb connection. Installers running polyethylene pipe use it to turn a line 90 degrees at a threaded connection. Spears describes its insert fittings as designed for ASTM D 2104 Schedule 40 or D 2239 SIDR pressure rated polyethylene pipe, and this elbow lists NSF under standards met.
  • 3/4" x 3/8" Spiral Barb Elbows: The Spears 3/4" x 3/8" polypropylene spiral barb 90 degree elbow also has a MIPT x spiral barb connection. Installers running polyethylene pipe use it to turn a line 90 degrees at a threaded connection. Spears describes its insert fittings as designed for ASTM D 2104 Schedule 40 or D 2239 SIDR pressure rated polyethylene pipe, and this elbow lists NSF under standards met.
  • MIPT x Spiral Barb Connection: The MIPT x spiral barb designation names the two connection types on the Spears elbows in this category, one threaded and one barbed. The 1/2" x 3/8" and 3/4" x 3/8" models both carry that designation, and both are polypropylene. Installers check the designation against the port and the tubing on the job before picking a size.

Buying Guide

Start with the pipe. The product description says Spears insert fittings are designed for ASTM D 2104 Schedule 40 or D 2239 SIDR pressure rated polyethylene pipe, so confirm the pipe on the job matches one of those standards before choosing a fitting.

Next, confirm the connection types. Spears elbows such as the 1/2" x 3/8" and 3/4" x 3/8" models combine a MIPT end with a spiral barb end, so the mating port needs a compatible thread and the tubing needs to suit a spiral barb. Then settle the size. Sizes are written as two dimensions, so check both dimensions against the port and the tubing before ordering.

When comparing Polypropylene Spiral Barb Elbows, also check material and standards. The Spears models reviewed are polypropylene and list NSF under standards met, which matters when a job spec calls for NSF. The description refers to pressure rated polyethylene pipe, so check the system pressure requirement against the pipe before selecting fittings. Finally, think about layout. A 90 degree elbow turns a run at one fixed angle, so confirm the room for the fitting and the tubing before rough-in.

Specs differ by model, so verify each product page for thread size, barb size, and standards before ordering. Record the full product title, including both sizes and the MIPT x spiral barb designation, on the work order so the correct elbow gets ordered.

Frequently Asked Questions

What pipe do polypropylene spiral barb elbows work with?

The product description says Spears insert fittings are designed for ASTM D 2104 Schedule 40 or D 2239 SIDR pressure rated polyethylene pipe. Polypropylene spiral barb elbows from Spears should be matched to that pipe type before purchase. Confirm sizing on the specific product page.

What sizes of polypropylene spiral barb elbows are listed?

Polypropylene spiral barb elbows in this category include the Spears 1/2" x 3/8" and 3/4" x 3/8" sizes, both with a MIPT x spiral barb connection. Each is a 90 degree elbow.

Do polypropylene spiral barb elbows meet NSF standards?

The Spears 1/2" x 3/8" and 3/4" x 3/8" polypropylene spiral barb elbows list NSF under standards met. Check the product page for the exact size before a job that requires NSF.

What material are these spiral barb elbows made from?

The Spears spiral barb elbows in this category are made of polypropylene, and the connections are MIPT x spiral barb. Polypropylene spiral barb elbows of this type are 90 degree fittings. Confirm the material on the product page for any other model.

How do I read the size on a spiral barb elbow?

Polypropylene spiral barb elbows list two sizes, such as 1/2" x 3/8" or 3/4" x 3/8". Both dimensions matter, so check them against the port and the tubing on the job. The connection type reads MIPT x spiral barb.

Didn't find what you're looking for? 
Let us know
.