Pro370XL Series are Liberty Pumps simplex submersible sewage pump systems built around an automatic sewage pump and a polyethylene tank. The P370XL systems are specifically designed to pass a 10' stack test and are IAPMO listed. Every model referenced here uses an automatic pump with two wide-angle piggyback mechanical floats and a 10' cord. The models shown range from 4/10 HP to 3/4 HP, in 115V and 208/230V versions, with either a 2" or 3" FNPT discharge. Several models also include a molded 4" no-hub type tank inlet and radial ribs for added strength. The 3/4 HP, 115V system with a 2" discharge is listed at 144 GPM at 5 ft of head. Horsepower, voltage, and discharge size decide which circuit and discharge line a system fits, so matching those three specs to the job matters before anything else.
Subcategories
Buying Guide
Start with the electrical supply, because it narrows the field fastest. The 115V models referenced here run from 4/10 HP to 3/4 HP, while the 208/230V model referenced here is 1/2 HP. Confirm the voltage at the panel before comparing anything else.
Next, compare shutoff head. The 4/10 HP model lists 17', the 1/2 HP models list 25', and the 3/4 HP models list 28'. Match that number to the elevation change and friction losses in the discharge run, and treat a higher shutoff head as extra margin rather than a target.
Then check the discharge connection. Most models referenced here have a 2" FNPT discharge, and one 3/4 HP model has a 3" FNPT discharge. Pick the size that matches the existing discharge piping so the install doesn't need extra reducers.
When a job involves stack testing, the Pro370XL Series is worth a close look because the P370XL systems are designed to pass a 10' stack test and are IAPMO listed. Confirm local code and inspector requirements before ordering.
Finally, check the tank and controls. Most models referenced here include a polyethylene tank with radial ribs, and several add a molded 4" no-hub type inlet. Every pump referenced here is automatic with two wide-angle piggyback mechanical floats and a 10' cord, so check the distance to the outlet before installation.
Frequently Asked Questions
What horsepower options come with the Pro370XL Series?
The Pro370XL Series models referenced here include 4/10 HP, 1/2 HP, and 3/4 HP simplex submersible sewage pump systems. The 4/10 HP model lists a 17' shutoff head, the 1/2 HP models list 25', and the 3/4 HP models list 28'. Check the product pages for the full lineup.
Do Pro370XL Series systems come in 208/230V?
Yes, the P372XLE52 is a 1/2 HP, 208/230V system with a 2" FNPT discharge. The 4/10 HP and 3/4 HP Pro370XL Series models referenced here are 115V, and the 1/2 HP P372XLE51 is also 115V. Confirm the supply voltage at the job before picking a model.
What discharge size does the Pro370XL Series use?
Most Pro370XL Series systems referenced here have a 2" FNPT discharge. One 3/4 HP, 115V system has a 3" FNPT discharge instead. Match the size to the existing discharge piping.
Are Pro370XL Series sewage pump systems built for stack testing?
The P370XL systems in the Pro370XL Series are specifically designed to pass a 10' stack test and are IAPMO listed. The series has all the same features as the standard P370 except for a 16 bolt cover. Verify local code requirements before the install.
What kind of floats do Pro370XL Series pumps use?
The Pro370XL Series pumps referenced here are automatic and use two wide-angle piggyback mechanical floats. Each model lists a 10' cord. Plan the outlet location with that cord length in mind.