SharkBite Reducing Ball Valves are push-to-connect shutoff valves that join two different pipe sizes. The listing includes the 3/4-inch x 1/2-inch SharkBite Max Reducing Ball Valve, which lists a 250 PSI maximum pressure, and the 3/4-inch x 1-inch SharkBite Reducing Ball Valve, which lists 200 PSI. Both are brass, lead free, and list a 200 degree F maximum temperature. Both connect PEX, copper, CPVC, and PE-RT pipe in any combination, and both list plumbing and heating applications. The SharkBite Max model describes a push-to-connect design that needs no soldering, clamps, glue, or unions. Both valves can be rotated after installation, which helps in tight spaces. Matching the valve to the pipe sizes and pressure requirement on the job helps avoid rework and keeps the shutoff dependable.
Subcategories
Buying Guide
Start with the pipe sizes at the joint. Reducing valves earn their place when two runs of different size meet and a shutoff is needed at that joint. The listed valves cover a 3/4-inch x 1/2-inch pair in the SharkBite Max model and a 3/4-inch x 1-inch pair in the standard SharkBite model, so confirm the exact size pair on the product page before ordering.
Check the pressure rating next. The SharkBite Max valve lists 250 PSI, while the 3/4-inch x 1-inch SharkBite valve lists 200 PSI. Both list a 200 degree F maximum temperature, so heating applications still need the system's operating limits checked against those figures.
Confirm pipe compatibility. Both valves list PEX, copper, CPVC, and PE-RT in any combination. When comparing SharkBite Reducing Ball Valves, note that the Max model is listed as quarter-turn and describes installation without soldering, clamps, glue, or unions.
Think about the install space. Both valves can be rotated after installation, which helps when the shutoff has to be reachable in a tight spot. Confirm lead free requirements for the project, since both listed valves are lead free brass. Finally, weigh the plumbing or heating application against the listed ratings, then pick the size pair that matches the run.
Frequently Asked Questions
What pressure are SharkBite reducing ball valves rated for?
The 3/4-inch x 1/2-inch SharkBite Max Reducing Ball Valve lists 250 PSI, and the 3/4-inch x 1-inch SharkBite Reducing Ball Valve lists 200 PSI. Ratings differ by model among SharkBite Reducing Ball Valves, so check the product page for the exact valve.
Can I mix PEX and copper on one reducing valve?
Yes. The listed SharkBite Reducing Ball Valves connect PEX, copper, CPVC, and PE-RT pipe in any combination. The SharkBite Max model describes installation with no need for soldering, clamps, glue, or unions.
What temperature can SharkBite reducing ball valves handle?
Both the 3/4-inch x 1/2-inch SharkBite Max and the 3/4-inch x 1-inch SharkBite reducing ball valves list a 200 degree F maximum temperature. Both are brass and list plumbing and heating applications. Confirm system temperatures against that rating.
Are SharkBite reducing ball valves lead free?
Both listed SharkBite Reducing Ball Valves are labeled lead free, and both are brass. Check the product page for the specific valve before specifying one for a project.
Can I rotate the valve after it's installed?
Yes. Both listed SharkBite reducing ball valves can be rotated after installation, which makes the shutoff easier to reach in tight spaces. Confirm the pipe sizes first, since the Max model is 3/4-inch x 1/2-inch and the other is 3/4-inch x 1-inch.