SharkBite Toilet & Faucet Kits are push-fit installation kits that group the valves, tubing, and connectors for a fixture hookup. The faucet kits listed pair two 1/2-inch x 1/4-inch (3/8-inch O.D.) push-to-connect stop valves with two 5 ft coils of 1/4-inch PEX tubing and two swivel faucet connectors. The toilet kits include one stop valve, one 5 ft coil of 1/4-inch PEX, and a 7/8-inch ballcock swivel toilet connector. A shower/tub kit is also listed, with 1/2-inch SB x FNPT adapters, elbows, and drop ear elbows. The straight stop and shower kit descriptions state that the push-fit valves work with copper, PEX, CPVC, or PE-RT pipe, and that the fittings can be rotated after assembly for easier installation in tight spaces. Kits matter to installers because the stop valve, tubing, and connector for a fixture come grouped in one kit.
Subcategories
Buying Guide
Start with the fixture. Faucet kits and toilet kits are built around different parts, so pick the kit that matches the job. Faucet kits include two stop valves, two coils of PEX tubing, and two swivel faucet connectors, while toilet kits include one stop valve, one coil, and a ballcock swivel toilet connector.
Next, choose between angle stop and straight stop versions. The listing includes both for faucets and toilets, so the supply layout at the fixture decides which one fits. Check the kit contents list for the stop valve type before ordering.
Then confirm pipe compatibility. The straight stop and shower kit descriptions state that the push-fit valves work with copper, PEX, CPVC, or PE-RT pipe. When comparing SharkBite Toilet & Faucet Kits, also look at connector sizes. The toilet kits list a 7/8-inch ballcock swivel connector, and the faucet and toilet kits use 1/4-inch PEX tubing.
Finally, plan for the install conditions. Several descriptions note that SharkBite push-to-connect fittings can be rotated after assembly, which helps in tight spaces. Disconnect clips are included in the toilet kits and the angle stop faucet kit for removing pipe from the fitting if needed. For shower work, the shower/tub kit lists ASSE 1061, NSF/ANSI 61, and NSF 372 approvals, so check those against the project requirements.
Frequently Asked Questions
What comes in a SharkBite faucet kit?
SharkBite faucet kits contain two 1/2-inch x 1/4-inch (3/8-inch O.D.) push-to-connect stop valves, two 5 ft coils of 1/4-inch PEX tubing, and two swivel faucet connectors. The listing includes angle stop and straight stop versions. Each includes a chrome trim cover that works as a disconnect clip when reversed.
What comes in a SharkBite toilet kit?
SharkBite toilet kits contain one 1/2-inch x 1/4-inch (3/8-inch O.D.) push-to-connect stop valve, one 5 ft coil of 1/4-inch PEX tubing, and a 7/8-inch ballcock swivel toilet connector. Disconnect clips in 1/2-inch and 1/4-inch sizes are included. The listing carries both angle stop and straight stop versions.
What pipe types do SharkBite toilet and faucet kits work with?
The straight stop faucet and toilet kit descriptions state that the push-fit valves connect to copper, PEX, CPVC, or PE-RT pipe. The shower/tub kit description says the same for its push-fit valves. Check the specific kit page before installing on other pipe types.
Can the fittings in SharkBite toilet and faucet kits be rotated after assembly?
Several SharkBite toilet and faucet kit descriptions state that push-to-connect fittings can be rotated after assembly. Rotation makes installation easier in tight spaces. Check each kit description for details.
Do SharkBite toilet and faucet kits include a shower option?
SharkBite Toilet & Faucet Kits include a shower/tub installation kit with 1/2-inch SB x FNPT adapters, elbows, and drop ear elbows, plus a 1/2-inch disconnect clip. Its description lists ASSE 1061, NSF/ANSI 61, and NSF 372 approvals. Read the kit page for the full contents.