SharkBite x PVC Ball Valves are push-fit shut-off valves that join Copper, PEX, CPVC or PE-RT pipe to schedule 40, 80 or 120 PVC pipe. The 3/4" SharkBite x 3/4" PVC valve and the 3/4" SharkBite x 1" PVC valve each list a max pressure of 200 PSI and a max temp of 200 degrees F, and both are lead free. Installers use them to install or replace a shut-off valve in potable water or hydronic water heating systems without soldering, clamps, glue or unions. The valve is easily rotated after installation, which makes the shutoff easier to reach in a tight space. Per the product note on the 3/4" SharkBite x 3/4" PVC valve, the PVC end can't be used on PEX. Matching each end to the right pipe before the job starts keeps the transition sound.
Subcategories
Buying Guide
Start with the pipe at each end of the valve. The valves on this page join Copper, PEX, CPVC or PE-RT pipe to schedule 40, 80 or 120 PVC pipe, so identify both materials and the PVC schedule before choosing a size. The PVC end can't be used on PEX, as noted on the 3/4" SharkBite x 3/4" PVC valve, so confirm which end goes to which pipe.
Next, match the sizes. The 3/4" SharkBite x 3/4" PVC valve and the 3/4" SharkBite x 1" PVC valve differ on the PVC connection, so measure the PVC pipe before ordering. When comparing SharkBite x PVC Ball Valves, also check the insertion depth on the product page, listed as 1-1/8" on the 3/4" SharkBite x 3/4" PVC valve.
Then check the ratings against the system. The 3/4" x 3/4" and 3/4" x 1" valves each list a max pressure of 200 PSI and a max temp of 200 degrees F, and both are lead free, which matters on potable water work. For hydronic water heating, compare the system's operating temperature and pressure to those ratings before installing.
Finally, think about the install. The push-fit connections join the pipe without soldering, clamps, glue or unions, and the valve is easily rotated after installation, which makes the shutoff easier to reach in a tight space. Read the product page for each valve before ordering, since notes and specifications can differ between sizes.
Frequently Asked Questions
What are SharkBite x PVC ball valves used for?
SharkBite x PVC Ball Valves are used to install or replace a shut-off valve in potable water or hydronic water heating systems. The push-fit connections let installers join Copper, PEX, CPVC or PE-RT pipe to schedule 40, 80 or 120 PVC pipe.
Can I use the PVC end of a SharkBite x PVC ball valve on PEX?
No. The product note on the 3/4" SharkBite x 3/4" PVC Ball Valve says the PVC end can't be used on PEX. The valve is meant for transitioning from PVC to PEX.
Do SharkBite x PVC ball valves need soldering or glue?
SharkBite x PVC Ball Valves use push-fit connections that join the pipe without soldering, clamps, glue or unions. Confirm the connection details on the product page for the exact valve.
What pressure and temperature ratings do SharkBite x PVC ball valves list?
The 3/4" SharkBite x 3/4" PVC and 3/4" SharkBite x 1" PVC Ball Valves each list a max pressure of 200 PSI and a max temp of 200 degrees F. Check the product page for the specific valve before installing.
Are SharkBite x PVC ball valves lead free?
The 3/4" SharkBite x 3/4" PVC and 3/4" SharkBite x 1" PVC Ball Valves are both listed as lead free. Verify the specification on the product page for any other SharkBite x PVC Ball Valve.