Stiebel Eltron Residential Water Heaters are compact, wall-mounted electric storage water heaters designed to be installed wherever hot water is needed. The listing includes the PSH 20 Plus at 21 gallons and the PSH 30 Plus at 32 gallons, along with replacement parts such as the anode rod for the PSH 20. Each PSH Plus heater pairs a smaller capacity tank with a 3 kW heating element for quick recovery. The tank has a porcelain enamel coating and a sacrificial magnesium anode. Both listed heaters operate on 240 volts, single phase. The water connection is 3/4 inch, and the heater connects with copper, PVC, or PEX tubing. Compact, wall-mounted design makes these heaters a practical fit where floor space is tight. Choosing the right capacity and the correct replacement parts keeps a service call short.
Subcategories
Buying Guide
Start with the hot water demand and the space on the job site. The PSH 20 Plus holds 21 gallons and the PSH 30 Plus holds 32 gallons, so pick the capacity that fits the fixtures it will serve. Both are wall-mounted, and each lists a diameter of 20 inches and a depth of 20-1/2 inches, so check the wall location and clearance before ordering.
Next, review the electrical and plumbing requirements. Both models list a 240 volt, single phase supply and a 3 kW heating element, so confirm the circuit can handle the load. The water connection is 3/4 inch and the heater connects using copper, PVC, or PEX tubing. The listed operating temperature range is 86 to 167 degrees F. When comparing Stiebel Eltron Residential Water Heaters, read each product record for the exact specs instead of assuming one model matches another.
Consider service parts at the same time. The PSH Plus tank uses a sacrificial magnesium anode and a porcelain enamel coating. An anode rod for the PSH 20 is listed as a replacement part, so techs can plan maintenance for installed units. Confirm the model before ordering any part, because fit is specific to the heater named in the product record. For anything not clear from the product record, verify with the manufacturer documentation or the SupplyHouse team before committing to the install.
Frequently Asked Questions
What tank sizes do the Stiebel Eltron PSH Plus water heaters come in?
The Stiebel Eltron Residential Water Heaters listing includes the PSH 20 Plus at 21 gallons and the PSH 30 Plus at 32 gallons. Both are wall-mounted electric tank models. Check each product record for the full specs before ordering.
What voltage do the Stiebel Eltron PSH Plus heaters need?
The PSH 20 Plus and PSH 30 Plus both list 240 volts, single phase, with a 3 kW heating element. Confirm the circuit on site before ordering a Stiebel Eltron residential water heater. Verify electrical details with the product record or the manufacturer documentation.
What size is the water connection on a PSH Plus water heater?
The PSH 20 Plus and PSH 30 Plus water heaters list a 3/4 inch water connection. The heater connects with copper, PVC, or PEX tubing. Match the supply piping to that connection size when planning the install.
How big is a Stiebel Eltron PSH Plus heater for wall mounting?
Both the PSH 20 Plus and PSH 30 Plus list a 20 inch diameter and a 20-1/2 inch depth. Stiebel Eltron residential water heaters in this line are wall-mounted, so confirm the wall location before ordering. Check clearances against the product record.
Is there an anode rod for the Stiebel Eltron PSH 20?
Yes, the Stiebel Eltron listing includes an anode rod for the PSH 20, classed as a replacement part. PSH Plus tanks use a sacrificial magnesium anode and a porcelain enamel coating. Confirm the heater model before ordering, since the listed rod names the PSH 20.