Tubular Quick Hook Up Waste Bend fittings connect a sink's tailpiece to the trap arm or waste line using a flanged, direct-connect design instead of a slip-joint compression fit. Common sizes run 1-1/2 inch by 12 inch and 1-1/2 inch by 24 inch, available in 17 gauge and 22 gauge rough brass from brands like Everflow, Sioux Chief, and Bluefin. Plumbers reach for the quick hook-up style when a job calls for a faster connection than a traditional slip nut and washer setup, since the flanged end seats and locks without the same alignment fuss. Bathroom and kitchen sink rough-ins, especially in remodel work where existing waste line height and angle vary, benefit from the bend's ability to route around obstacles without adding extra fittings. Picking the right length and gauge keeps the connection both accessible for future service and durable enough for daily use.
Subcategories
Buying Guide
Length is the first decision. A 12 inch bend covers most straightforward sink rough-ins where the tailpiece and trap arm sit close together, while a 24 inch bend closes a larger gap in remodel work where the waste line wasn't moved to match a repositioned fixture. Measuring the actual distance between tailpiece and trap arm before ordering avoids a mid-install trip back to the supply house for a longer piece.
Gauge comes next. 22 gauge rough brass covers standard residential installs and keeps material cost down, while 17 gauge adds wall thickness for commercial washrooms or higher-traffic fixtures where extra durability matters more than cost. Both gauges come in rough brass finish, meant for concealed installation behind a wall or cabinet rather than as a visible fixture.
A Tubular Quick Hook Up Waste Bend is worth choosing over a slip-joint bend specifically for speed of installation, since the flanged direct-connect end seats without the alignment adjustment a slip nut and washer setup often needs. Jobs with tight time windows, like occupied-unit remodels, benefit most from that faster connection. Brand selection between Everflow, Sioux Chief, and Bluefin mostly comes down to what a local supply house stocks in the needed size and gauge, since all three offer comparable rough brass construction at the standard lengths.
Frequently Asked Questions
What's the difference between a quick hook-up waste bend and a slip-joint waste bend?
A quick hook-up waste bend uses a flanged, direct-connect end that seats and locks in place, while a slip-joint waste bend relies on a slip nut and washer that need careful alignment to seal. Faster installs are the main advantage of the quick hook-up style, since there's less adjustment needed at the connection point. Both styles serve the same purpose of connecting a sink tailpiece to a trap arm or waste line.
What length waste bend fits a standard bathroom sink?
Most standard bathroom sink rough-ins use a 1-1/2 inch by 12 inch waste bend, which covers the typical distance between tailpiece and trap arm. A 24 inch version fits jobs where the waste line sits farther from the fixture, common in remodels that reposition a sink without moving the rough plumbing. Measuring the actual gap before ordering avoids picking the wrong length.
What's the difference between 17 gauge and 22 gauge rough brass?
17 gauge rough brass has a thicker wall than 22 gauge, adding durability for commercial washrooms or higher-traffic fixtures. 22 gauge is the more common choice for standard residential installs, balancing cost against the durability a typical single-family bathroom or kitchen needs. Both gauges come in the same standard lengths from most manufacturers.
Can a waste bend be cut to fit a custom length?
Tubular waste bends are typically sized in standard lengths like 12 inch and 24 inch rather than sold as cut-to-fit stock, so matching the closest standard length to the actual gap is the usual approach. A 24 inch bend can sometimes be trimmed shorter on site if the exact fit falls between standard sizes. Rough brass tubing cuts cleanly with a standard tubing cutter without special tools.
Are these waste bends compatible across brands like Everflow and Sioux Chief?
Everflow, Sioux Chief, and Bluefin all manufacture 1-1/2 inch tubular quick hook-up waste bends in the same standard lengths and gauges, so compatibility with standard drain fittings and tailpieces is consistent across brands. Matching the connection style, whether slip-joint or quick hook-up, matters more than brand when swapping components mid-job. Checking gauge and length against the existing rough-in still confirms a proper fit regardless of manufacturer.