Uponor Slab Radiant Heat Packages are bundled material lists for in-slab radiant floor heating, built around 1/2" hePEX plus oxygen barrier PEX tubing. The SLAB250U covers 250 sq ft with one 300 ft coil, and the SLAB1000U covers 1000 sq ft with four coils and 1200 ft of tubing. Both packages are based on 12" spacing. The SLAB250U and SLAB1000U list tubing, manifold assemblies, fittings, and accessories, but pumps, controls, and valves that may be needed to complete the installation are not included. Radiant contractors use the packages to order a slab job under one part number instead of building the list piece by piece. Knowing what is in the package, and what is not, keeps the rest of the mechanical room order complete.
Subcategories
Buying Guide
Start with the heated area, since the packages are named by coverage: the SLAB250U, SLAB750U, SLAB1000U, and SLAB1500U cover 250, 750, 1000, and 1500 sq ft. Measure the slab zones to be heated and choose the package that covers them. Next, check the loop count. The SLAB1000U manifold is a 4 loop supply and return assembly, so the loop count needs to match the design. Then confirm the spacing. Material in the SLAB250U and SLAB1000U is based on 12" spacing, and both list 1.2 ft of tubing per sq ft of coverage. A tighter or wider design changes the tubing quantity, so verify against the load calculation before ordering. When comparing Uponor Slab Radiant Heat Packages, read the contents list rather than assuming every item is included. The SLAB250U and SLAB1000U state that pumps, controls, and valves that may be necessary to complete the installation are not included, so those need separate selection. Check the accessories too: the SLAB1000U lists PVC bend supports, a pressure test kit, a plastic tube cutter for PEX through 1", and zip ties. Confirm that fitting types match the manifold and tubing in the design. The SLAB1000U lists eight 1/2" QS-style fitting assemblies with R20 thread. Finally, follow Uponor's installation guidance and local code for the slab pour.
Frequently Asked Questions
What's included in the SLAB1000U radiant heat package?
The SLAB1000U is one of the Uponor Slab Radiant Heat Packages and covers 1000 sq ft. It lists four 300 ft coils of 1/2" hePEX plus, a TruFlow Jr. 4 loop manifold assembly, eight 1/2" QS-style fitting assemblies, eight 3/4" PVC bend supports, a plastic tube cutter, a pressure test kit, and zip ties. Material is based on 12" spacing.
Do Uponor slab radiant heat packages include a pump or controls?
No. The SLAB250U and SLAB1000U Uponor Slab Radiant Heat Packages state that pumps, controls, and valves that may be necessary to complete the installation are not included. Plan those components separately.
How much tubing comes in the SLAB250U?
The SLAB250U Uponor slab radiant heat package covers 250 sq ft and includes one 300 ft coil of 1/2" hePEX plus. It also lists manifold assemblies, fittings, and accessories. Material is based on 12" spacing.
What spacing are Uponor slab packages based on?
The SLAB250U and SLAB1000U slab radiant heat packages are based on 12" spacing. At that spacing, both list 1.2 ft of tubing per sq ft of coverage. A different spacing changes the tubing quantity, so check the design before ordering.
What coverage sizes do Uponor slab radiant heat packages come in?
Uponor Slab Radiant Heat Packages include the SLAB250U at 250 sq ft, the SLAB750U at 750 sq ft, the SLAB1000U at 1000 sq ft, and the SLAB1500U at 1500 sq ft. Pick the package by the area to be heated. Confirm each package's contents on its product page.