High Temperature Foil Tape (3" x 150')
Venture Tape 3243 is an annealed aluminum foil tape coated with a high temperature, extremely aggressive solvent acrylic pressure sensitive adhesive. Designed specifically for high heat flue closure applications, this 3-inch wide tape applies easily to sheet metal ducts on both flat and irregular surfaces. Each roll provides 150 feet of coverage.
Key Features & Benefits
Compatibility & Requirements
Use this tape on metal flue pipes, smoke pipes, and high-temperature ductwork where operating temperatures remain below 425°F. Suitable for sealing seams and joints in heating system exhaust piping, including wood stove and furnace flue assemblies. Clean surfaces thoroughly before application to ensure proper adhesion. Remove old tape residue, soot, and debris from all metal surfaces. Allow newly installed or cleaned pipes to cool completely before taping.
Installation & Care
Clean the surface with a degreaser or alcohol to remove oil, dust, and soot. Dry the surface completely. Apply the tape with firm pressure, smoothing from the center outward to eliminate air pockets. Overlap seams by at least half an inch for complete coverage. Wrap circumferential joints with a full wrap plus a two-inch overlap. Check tape annually before heating season for lifting or degradation and replace as needed.
What's Included
Frequently Asked Questions
Q: Is this product have a 181 or 183 rating?
A: It has a service rating of 425°F.
Q: What is the difference between this foil tape and standard duct tape?
A: This aluminum foil tape withstands continuous temperatures up to 425°F and uses a solvent acrylic adhesive designed for metal-to-metal bonds, while standard fabric-backed duct tape fails at high temperatures and is not suitable for flue applications.
| Color: | Silver |
|---|---|
| Length (Inches): | 1800" |
| Width (Inches): | 3" |
| Material: | Aluminum |
| Length: | 150' |
| Product Type: | Foil Tape |
| Type: | Flue |
it has a service rating of 425F.