Miscellaneous Water Filter Parts & Accessories are the add-on components that mount, dispense from, and drain water treatment equipment. Products here include Pentair 3/4-inch mounting bracket caps, Wal-rich lead free water filter faucets with a 1/4-inch connection, and the Air Gap International Mr Drain universal air gap for water softeners and filters. Each part handles a specific job around the filter or softener itself, so the correct pick depends on the equipment already installed and the point being served. Installers turn to these items when finishing a new filtration setup, replacing a faucet, or adding a drain air gap to a softener. Matching the part to its connection size and application before the visit keeps the job moving. Because these small components sit at the point of use or the point of discharge, a poor match shows up fast as a leak, a drip, or a slow drain.
Subcategories
Buying Guide
Start with the part's job, then match the size. Miscellaneous Water Filter Parts & Accessories cover mounting, dispensing, and draining, so a cap, a faucet, and an air gap are not interchangeable. Confirm which function is missing or worn before comparing models.
For mounting bracket caps, check the connection size first. The Pentair caps shown here carry a 3/4-inch connection, and the cap number and color identify the version. A #20 Blue cap includes pressure relief, while a #10 cap is Clear/Black. Match the number to the cap being replaced.
For filter faucets, confirm the 1/4-inch connection and the lead free status, then decide on reach. One Wal-rich model has a 6-inch height, and the Long Reach version uses an angled spout for a longer span. Measure the sink or countertop clearance before ordering.
For softener drains, check inlet and outlet details. The Mr Drain air gap lists a 1/2-inch OD inlet, a 1-1/2 inch or 2 inch standpipe outlet, a 12.5 GPM maximum flow rate, and a UPC approval. Compare that flow rate against the softener's discharge rate.
Record the model number from the existing part so the replacement matches on the first try. Finally, read the product page for each item and verify fit against the equipment model before the truck leaves. Small parts cause big callbacks when the size is off by one step.
Frequently Asked Questions
What counts as a miscellaneous water filter part or accessory?
Miscellaneous Water Filter Parts & Accessories are the supporting components around a filter or softener rather than the filter itself. Examples here include Pentair mounting bracket caps, Wal-rich filter faucets, and an Air Gap International universal air gap. Check each product page for its application.
What connection size do the Pentair mounting bracket caps use?
The Pentair mounting bracket caps in this water filter parts listing have a 3/4-inch connection size. The #20 Blue version includes pressure relief, and the #10 version is Clear/Black. Confirm the number against the cap being replaced.
Are the Wal-rich water filter faucets lead free?
The Wal-rich water filter faucets shown in this listing are listed as lead free with a 1/4-inch connection. One has a 6-inch height, and the Long Reach version has an angled spout for a longer span. Check each product page before ordering.
What flow rate can the Mr Drain air gap handle?
The Air Gap International Mr Drain universal air gap, a water filter accessory for softeners, lists a maximum flow rate of 12.5 GPM. At that flow rate, the air gap is dry on the outside. Compare that figure to the softener's discharge rate.
What drain sizes does the Mr Drain air gap fit?
The Mr Drain air gap in this water filter accessories category lists outlets for 1-1/2 inch or 2 inch standpipe drains. Its inlet is 1/2-inch OD for direct 1/2-inch PVC pipe connection. It lists a UPC approval.