Weil McLain EGH boiler parts keep this commercial cast iron boiler line running after the original components wear out or fail. The EGH series is built with a cast iron boiler section, runs on natural gas with a propane option available through a conversion kit, and covers five sizes from 315 to 495 MBH input with efficiency up to 82.52% AFUE, rated for both water and steam applications.
Because the line spans multiple sizes and a handful of production years, matching a replacement part to the exact boiler model and section count is the difference between a clean repair and a part that doesn't fit. Stocking common wear items for this series, rather than ordering one at a time as failures come up, keeps a commercial boiler back in service faster when a building can't go without heat.
Subcategories
Buying Guide
Ordering Weil McLain EGH boiler parts correctly starts with identifying the exact model number and section count from the boiler's rating plate. A rating plate photo or the model number written down before placing an order is the simplest way to avoid a part that looks right but doesn't fit.
Fuel type matters just as much as size, since the EGH spans five input sizes from 315 to 495 MBH and parts aren't interchangeable across sizes. The EGH is built for natural gas as standard, with propane operation available only through a dedicated conversion kit rather than a simple orifice swap, so confirming which fuel the boiler is actually set up for before ordering gas valve or burner components prevents an installation that won't pass a combustion check.
For section and gasket work, matching the gasket kit to the boiler's actual section count keeps the water or steam side sealed under full operating pressure, since these boilers are rated for both applications and see correspondingly higher stress on gasket joints. Draft hood and vent parts should be matched to the boiler's flue outlet size rather than assumed from a similar-looking model, since venting is one of the areas where reusing a part from a different production run can create a real safety issue. Keeping the boiler's full model number on hand for every order is worth more than an eyeball comparison to a catalog photo.
Frequently Asked Questions
What sizes does the Weil McLain EGH boiler come in?
The EGH series is offered in five input sizes ranging from 315 to 495 MBH, with efficiency up to 82.52% AFUE. Confirming the exact size from the rating plate is important since parts aren't interchangeable across the line.
Can an EGH boiler run on propane?
The EGH is set up for natural gas as standard, but it can run on propane with a dedicated conversion kit. A simple orifice change alone isn't sufficient for the switch.
Is the EGH boiler rated for steam or hot water systems?
Both. The EGH series is rated for water and steam applications, which is worth confirming before ordering pressure-rated components like gaskets or relief valves.
How do I know if a leak needs a new gasket or a new boiler section?
A leak at a joint between sections usually points to a worn gasket rather than a cracked section, and replacing the gasket kit is the more common fix. If the cast iron itself is cracked, the section needs to be replaced instead.
Why does the EGH use a horizontal-to-vertical draft hood?
The horizontal-to-vertical arrangement eliminates the need for a bulky traditional draft hood while still maintaining proper draft for the boiler's flue outlet. Vent components should be matched to that outlet size when ordering replacements.