Apply to be a TradeMaster!
Filter menu expanded

Filters

56 items
Reset

SORT

Product Availability
–

Show In Stock Only (13)

Used With
–

86 Boilers (1)
88 Boilers (1)
94 Boilers (1)
AHE Boilers (1)
CG Boilers (1)
CGa Boilers (1)
CGi Boilers (2)
CGs Boilers (2)
CGT Boilers (2)
CGx Boilers (1)

Review Score
–

(8)

Price Range
–

$10 to $15 (7)
$15 to $20 (2)
$30 to $35 (1)
$50 to $60 (1)
$60 to $70 (2)
$90 to $100 (1)
$100 to $200 (7)
$200 to $300 (5)
$300 to $400 (10)
$400 to $500 (1)

Weil McLain WGO Boiler Parts

Help Face
Need a little help?
FIND PARTS FOR YOUR UNIT
56 items
Grid
List
Compare
Product Image of Panel RH SD & BK Jacket "E" GO S2, 426-700-256
$299.35 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of Narrow Front Section w/o Tankless Opening, 316-700-215
$1,291.04 each
Backorder
Get it by Tue, Dec 22 - Wed, Jan 27
Backorder
Get it by Tue, Dec 22 - Wed, Jan 27
Compare
Product Image of GO-7 Beckett Oil Burner, for WGO-7, WTGO-7, or SGO-7, 386-700-412
$857.51 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of KIT-S Jacket Panel-L&B WGO-4 S3 UL726, 381-355-501
$337.57 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of DMPR KIT WGO/WTGO 6RD, 381-800-505
DMPR KIT WGO/WTGO 6RD, 381-800-505
SKU: 381-800-505
Weil-McLain
SKU: 381-800-505
Brand: Weil-McLain
$387.42 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of Assembly-Section/Jacket/Col-Hd for WTGO-4 - Series 4, 386-701-039
$3,588.86 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of 7/16" x 20" Tie Rod, 560-234-534
7/16" x 20" Tie Rod, 560-234-534
SKU: 560-234-534
Weil-McLain
SKU: 560-234-534
Brand: Weil-McLain
$12.25 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of Carlin Burner For WGO-4, 521-100-041
Carlin Burner For WGO-4, 521-100-041
SKU: 521-100-041
Weil-McLain
SKU: 521-100-041
Brand: Weil-McLain
$753.15 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Resources
FAQs, Manuals & Videos
Articles
More About Weil McLain WGO Boiler Parts

Weil McLain WGO boiler parts are the replacement components used to service the WGO Series of oil-fired water boilers found in residential and light commercial heating systems. The WGO Series 4 line covers eight sizes with a capacity range of 98 to 357 MBH and reaches up to 87% AFUE efficiency, so the parts stocked under it span burner mounting hardware, aquastats, circulators, relief valves, gaskets, and jacket components sized to specific block numbers. Weil McLain builds the WGO in packaged, semi-packaged, and knocked-down configurations, and replacement parts differ depending on how the original unit shipped. A boiler set up for biodiesel operation with an approved Beckett or Carlin burner carries B100 certification, which affects which burner parts and nozzles apply. Confirming the boiler's series number, block size, and burner make before ordering keeps a repair on schedule and prevents a mismatched part from delaying a heating call. Technicians servicing older oil-fired systems rely on this category to keep WGO boilers running without a full unit swap.

Subcategories

  • Burners & Burner Components: Burner components for the WGO include nozzles, electrodes, and mounting hardware sized for approved Beckett and Carlin burner models. A technician matching parts to the original burner make and model avoids airflow or ignition issues after a swap. Correct nozzle angle and gallonage keep combustion efficiency in line with the boiler's rated output.
  • Aquastats & Controls: Aquastats and related controls regulate water temperature and circulator operation on WGO boilers. Replacement controls need to match the original wiring configuration, since packaged and knocked-down units are wired differently at the factory. A failed aquastat is a common reason for short-cycling or a boiler that won't reach setpoint.
  • Circulators & Pumps: Circulator pumps move heated water from the WGO boiler to the distribution system, and factory-matched models are available for packaged configurations. Sizing a replacement circulator to the original system prevents flow problems in multi-zone setups. A worn circulator bearing or seal is often the source of pump noise or a slow-to-heat system.
  • Relief Valves & Gaskets: Relief valves protect the WGO boiler from excess pressure, while block and door gaskets seal the cast iron sections against combustion gas leaks. Replacing a relief valve at the pressure rating stamped on the original unit keeps the safety margin intact. Gasket kits are sized to the specific number of sections in the boiler block.
  • Jacket & Venting Hardware: Jacket panels, insulation, and collector hood components complete the WGO's packaged and semi-packaged configurations. The boiler supports both vertical and horizontal flue outlets, so venting hardware differs by installation type. Replacing jacket hardware after a repair keeps the boiler's combustion chamber properly sealed.
  • Buying Guide

    Ordering the right Weil McLain WGO boiler parts starts with the boiler's series and block number, both found on the rating plate mounted on the jacket or the cast iron block itself. The WGO has been produced across several series, and block sizes vary by capacity, so a part that fits one block number will not necessarily fit another even within the same series.

    Burner make matters as much as boiler series. Because the WGO pairs with approved Beckett or Carlin burners rather than a single dedicated design, nozzle, electrode, and mounting parts need to match whichever burner is installed, not just the boiler model. Checking the burner nameplate alongside the boiler rating plate avoids ordering a part that looks similar but doesn't seat correctly.

    Configuration also affects parts selection when shopping Weil McLain WGO boiler parts: packaged units arrive with jacket, collector hood, and controls already installed, while knocked-down units ship as separate components for field assembly. A control or wiring harness pulled from a packaged unit may not match a knocked-down installation's wiring layout.

    For safety components like relief valves, matching the pressure rating stamped on the original part is not optional. A wrong-rated valve either fails to protect the system or opens prematurely, so having the old part's stamped rating on hand before ordering its replacement is worth the extra minute it takes.

    Frequently Asked Questions

    How do I identify the right WGO block size before ordering parts?

    Check the rating plate on the boiler jacket or cast iron block for the series and model number, since it ties directly to the block size and capacity range that determines which gaskets, jacket panels, and burner mounting hardware will fit.

    Do WGO parts differ between packaged and knocked-down units?

    Yes. Packaged units ship with jacket, collector hood, and controls already installed, while knocked-down units ship as separate components. Controls and wiring harnesses pulled from one configuration don't always match the other, so confirm how the original unit was installed.

    Can I use any oil burner nozzle with a WGO boiler?

    No. The WGO pairs with approved Beckett or Carlin burners, and nozzle angle and gallonage need to match the specific burner model installed, not just the boiler series. A mismatched nozzle affects combustion efficiency and can trigger ignition problems.

    What causes a WGO boiler to short-cycle?

    A failed aquastat is a common cause, since it controls water temperature and circulator operation. Testing the aquastat before replacing other components can save a return trip if the real issue is a control rather than the burner or circulator.

    Is a WGO boiler set up for biodiesel different from a standard oil-fired unit?

    Units paired with an approved Beckett or Carlin burner can reach B100 certification, meaning they're rated for up to 100% biodiesel. Burner nozzles and related parts for a biodiesel-rated setup may differ from a standard fuel oil configuration, so confirm the fuel type before ordering.

Didn't find what you're looking for? 
Let us know
.