White JG SpeedFit CTS Twist & Lock Slip Adapters are John Guest Speedfit slip connectors, a push-to-connect option for replacing burst or damaged pipe without altering existing pipe work. The listing includes the 1/2" CTS ID and 3/4" CTS ID Twist & Lock Speedfit Slip Connectors. Product descriptions call them a quick and simple repair method, which matters when a leak has to be fixed and the surrounding pipe run left as is. Connections to PEX add a requirement. A TSI20 insert is called out for the 1/2" connector and a TSI28 insert for the 3/4" connector. Each insert is required for heating applications, recommended for plumbing applications, and needed at every end connected to PEX. Inserts are sold separately, so they belong on the parts list before the job starts. Confirming pipe type and size ahead of time helps a contractor finish the repair in one visit.
Subcategories
Buying Guide
Start with the pipe being repaired. Slip connectors are meant to replace burst or damaged pipe without altering the existing pipe work, so confirm the pipe size and material first. The listing includes 1/2" and 3/4" CTS ID connectors, and each one must match the pipe it joins.
Next, check whether the repair ends on PEX. Per the product descriptions, a TSI20 insert is required for heating applications and recommended for plumbing applications on the 1/2" connector when connecting to PEX. The 3/4" connector calls for a TSI28 insert under the same conditions. An insert is needed for each end of the fitting connected to PEX, and inserts are sold separately. A repair that ties to PEX on both ends needs two inserts.
When comparing White JG SpeedFit CTS Twist & Lock Slip Adapters, keep the two size listings straight. The 1/2" and 3/4" connectors each pair with their own insert size, so a mix up on the truck is an easy mistake.
Consider the application as well. The 3/4" listing also describes slip tee connectors as a way to break into a rigid run, and notes that tee installation kits do not have IAPMO or ICC approval. Verify code requirements with the local authority before choosing a fitting for a given job.
Last, gather the connectors, the correct inserts, and the manufacturer's installation instructions before leaving the shop.
Frequently Asked Questions
What are White JG SpeedFit CTS Twist & Lock Slip Adapters used for?
White JG SpeedFit CTS Twist & Lock Slip Adapters are John Guest slip connectors for replacing burst or damaged pipe. They let a contractor make the repair without altering the existing pipe work. The listing includes 1/2" and 3/4" sizes.
Do I need an insert when connecting a slip adapter to PEX?
For White JG SpeedFit CTS Twist & Lock Slip Adapters, the product descriptions say an insert is required for heating applications and recommended for plumbing applications when connecting to PEX. The 1/2" connector calls for a TSI20 insert and the 3/4" connector for a TSI28 insert. An insert is needed for each end connected to PEX.
Are the PEX inserts included with the slip connector?
No. The descriptions for these slip adapters state the insert is sold separately. Add the correct insert to the parts list with the connector when the repair ends on PEX.
What sizes do White JG SpeedFit CTS slip adapters come in?
The listing includes a 1/2" CTS ID and a 3/4" CTS ID Twist & Lock Speedfit Slip Connector. Check the pipe size before ordering, since each connector pairs with its own insert size.
Do the tee installation kits carry IAPMO or ICC approval?
The 3/4" listing for these slip adapters notes that tee installation kits do not have IAPMO or ICC approval. On a job with code requirements, check with the local authority before choosing the fitting.