White JG SpeedFit CTS Twist & Lock Tees are John Guest Speedfit push-to-connect tees used to join copper, PEX, or CPVC pipe in any combination with no solder, glue, or tools required. The listing includes CTS ID tees in 3/8", 1/2", 3/4", and 1" sizes. JG Speedfit fittings use a collet with stainless steel teeth that grips the pipe when fully inserted, plus an EPDM O-ring for the seal. The product descriptions also set limits. The 1/2" and 3/4" listings state that Speedfit fittings cannot be used on stainless steel pipe and are not for gas, fuel oil, or compressed air applications. The 1/2", 3/4", and 1" listings call for an insert on PEX connections, required for heating and recommended for plumbing, and sold separately. Knowing those limits before ordering keeps a branch connection from turning into a return trip.
Subcategories
Buying Guide
Start with the pipe type and size. John Guest Speedfit tees join copper, PEX, or CPVC pipe in any combination, and the listing includes 3/8", 1/2", 3/4", and 1" CTS ID sizes. Match the tee size to the tube on the run.
Next, rule out applications the fitting is not made for. The 1/2" and 3/4" descriptions say Speedfit fittings cannot be used on stainless steel pipe and are not for gas, fuel oil, or compressed air.
Then plan for PEX. On the 1/2", 3/4", and 1" listings, an insert is required for heating applications and recommended for plumbing applications when connecting to PEX. The 3/4" tee calls for a TSI28 insert and the 1" tee a TSI36 insert, and an insert is needed at each end connected to PEX. Inserts are sold separately.
When comparing White JG SpeedFit CTS Twist & Lock Tees, look at the connection type as well. The 3/8" record lists CTS as its connection type and plumbing as its application. Confirm that the tube is CTS sized before ordering.
Finally, consider service work. The locking cap holds the pipe once it is twisted into place, and disconnection needs no tools. Part numbers in the listing, such as PEI0220 for the 1/2" tee and PEI0236 for the 1" tee, make the exact match easy to confirm.
Frequently Asked Questions
What can White JG SpeedFit CTS Twist & Lock Tees connect?
White JG SpeedFit CTS Twist & Lock Tees join copper, PEX, or CPVC pipe in any combination with no solder, glue, or tools required. The listing includes 3/8", 1/2", 3/4", and 1" CTS ID sizes. Confirm the tube size before ordering.
Can I use Speedfit tees on stainless steel pipe or gas lines?
No. The 1/2" and 3/4" descriptions for White JG SpeedFit CTS Twist & Lock Tees say Speedfit fittings cannot be used on stainless steel pipe and are not for gas, fuel oil, or compressed air applications. Use them on the copper, PEX, or CPVC pipe the descriptions name.
Do I need an insert when a Speedfit tee connects to PEX?
On the 1/2", 3/4", and 1" White JG SpeedFit CTS Twist & Lock Tees, the descriptions say an insert is required for heating applications and recommended for plumbing applications when connecting to PEX. The 3/4" tee calls for a TSI28 insert and the 1" tee for a TSI36 insert. Inserts are sold separately, with one needed at each end connected to PEX.
Which part numbers are listed for these Speedfit tees?
The listing includes the 3/8" tee, PSEI0216, the 1/2" tee, PEI0220, the 3/4" tee, PEI0228, and the 1" tee, PEI0236. Each is a CTS ID JG Twist & Lock Speedfit Union Tee. Match the part number to the tube size on the job.
How do White JG SpeedFit tees hold and seal the pipe?
White JG SpeedFit CTS Twist & Lock Tees use a collet with stainless steel teeth that grips the pipe when fully inserted, along with an EPDM O-ring for the seal. The locking cap holds the pipe once it is twisted into place. Disconnection needs no tools.