White JG SpeedFit CTS Twist & Lock Union 90° Elbows are John Guest push-to-connect elbows for joining copper, PEX, or CPVC pipe in any combination with no solder, glue, or tools. Each fitting uses a collet with stainless steel teeth that grips the pipe when it's fully inserted, plus an EPDM O-ring for the seal. A locking cap holds the pipe in place once twisted into position. Disconnection needs no tools either, which helps on repairs. The listed sizes include 3/8, 1/2, 3/4, and 1 inch CTS. For heating applications on PEX, the 1/2, 3/4, and 1 inch elbows call for a TSI20, TSI28, or TSI36 insert, respectively, at each PEX connection, sold separately. Catching that detail early keeps the right parts on the order and the install on schedule.
Subcategories
Buying Guide
Start with the pipe material and size. The elbows here are CTS sizes, with 3/8, 1/2, 3/4, and 1 inch models shown in the catalog records, and they join copper, PEX, or CPVC in any combination. Match the elbow size to the tubing before comparing anything else.
Next, plan for PEX inserts. Per the product notes, heating applications that connect to PEX require a TSI20 insert on the 1/2 inch elbow, a TSI28 on the 3/4 inch, and a TSI36 on the 1 inch, and the notes recommend inserts for plumbing applications too. An insert is needed at each end connected to PEX, and inserts are sold separately.
When choosing White JG SpeedFit CTS Twist & Lock Union 90° Elbows, compare size and insert needs for each connection on the job. The twist and lock cap and the tool-free connection suit jobs where speed matters, and disconnection needs no tools.
Check the application limits. The product notes on the 1/2, 3/4, and 1 inch elbows say Speedfit fittings cannot be used on stainless steel pipe and are not for gas, fuel oil, or compressed air applications. Finally, build the parts list by size, inserts included, so every connection has what it needs before work begins.
Frequently Asked Questions
What sizes do White JG SpeedFit CTS twist and lock union 90 degree elbows come in?
The White JG SpeedFit CTS Twist & Lock Union 90° Elbows category includes 3/8, 1/2, 3/4, and 1 inch CTS models. Each is a John Guest push-to-connect elbow. Check the individual product page for the size needed.
What pipe can JG Speedfit twist and lock elbows connect?
John Guest Speedfit push-to-connect elbows join copper, PEX, or CPVC pipe in any combination, with no solder, glue, or tools required. The twist and lock union 90-degree elbows in this category follow that description. Verify the pipe type and size before ordering.
Do JG Speedfit elbows need inserts for PEX?
For the 1/2, 3/4, and 1 inch JG Speedfit twist and lock union 90-degree elbows, the product notes call for a TSI20, TSI28, or TSI36 insert, respectively, in heating applications connecting to PEX. An insert is needed for each end connected to PEX, and inserts are sold separately. The notes also recommend inserts for plumbing applications.
Can JG Speedfit elbows go on stainless steel pipe or gas lines?
No. The product notes on the 1/2, 3/4, and 1 inch JG Speedfit twist and lock elbows say Speedfit fittings cannot be used on stainless steel pipe. The notes also say not to use them for gas, fuel oil, or compressed air applications.
How does the twist and lock cap work on a JG Speedfit elbow?
JG Speedfit fittings use a collet with stainless steel teeth that grips the pipe when it's fully inserted, and the locking cap locks the pipe in place when twisted into position. An EPDM O-ring handles the seal. Disconnection needs no tools.