Z-Vent Double Wall Tee Caps are drain fittings for Z-FLEX double wall vent systems, and the catalog lists them in 3-inch, 4-inch, 6-inch, 8-inch and 12-inch diameters. The listed tee caps carry a bleeder feature, and their descriptions state that a tee cap with drain is required at the base of a vertical stack. The 6-inch, 8-inch and 12-inch models are listed with a ZV-Clamp, and high temperature silicone tubing is a separate item. Contractors and installers use these fittings to finish the base of a vertical vent stack with a drain. Matching the tee cap diameter to the vent system is the first step, since each size is a separate product. Reading the product title for the drain and clamp details helps avoid missing parts on the job.
Subcategories
Buying Guide
Start with the vent diameter. The catalog shows 3-inch, 4-inch, 6-inch, 8-inch and 12-inch tee caps, and each size is a separate product, so the tee cap has to match the vent size at the base of the stack. Diameter is the detail that drives every other choice on the order.
Next, read the product title for included hardware. When comparing Z-Vent Double Wall Tee Caps, note that the 6-inch, 8-inch and 12-inch models are listed with a ZV-Clamp, while the 3-inch and 4-inch titles do not mention one, so confirm clamp needs on the product page before ordering.
Then plan for drainage. The descriptions state that a tee cap with drain is required at the base of a vertical stack and that high temperature silicone tubing is a separate item, so add the tubing to the parts list when the design calls for it. Each listed tee cap carries a bleeder feature and a double wall vent type, so match those against the vent system on the job.
Finally, verify requirements with the vent manufacturer's documentation and the local code authority, since a catalog listing cannot confirm system compatibility, approvals or installation details. Keep the vent layout and parts list together when comparing sizes, so the diameter, clamp and drain details are all checked in one pass.
Frequently Asked Questions
What sizes do Z-Vent double wall tee caps come in?
The catalog shows Z-Vent double wall tee caps in 3-inch, 4-inch, 6-inch, 8-inch and 12-inch diameters. Each is a Z-FLEX tee cap with a bleeder feature. Check the product title for the exact size and clamp details.
Do Z-Vent double wall tee caps need a drain?
The descriptions for Z-Vent double wall tee caps with drain state that a tee cap with drain is required at the base of a vertical stack. The listed products carry a bleeder feature. Confirm the specific requirements for the job with the vent manufacturer's documentation and the local code authority.
Do the 6-inch, 8-inch and 12-inch tee caps include a ZV-Clamp?
The 6-inch, 8-inch and 12-inch Z-Vent double wall tee caps are listed as tee caps with drain and ZV-Clamp. The 3-inch and 4-inch titles do not mention a clamp. Verify what is included on the product page before ordering.
Is silicone tubing included with Z-Vent double wall tee caps?
The descriptions say high temperature silicone tubing is a separate item for these Z-Vent double wall tee caps. Plan to add the tubing to the order when the design calls for it. Check the product page for the exact details.
Where does a Z-Vent tee cap with drain go in a vent stack?
The descriptions for Z-Vent double wall tee caps with drain state that the tee cap is required at the base of a vertical stack. Confirm the exact placement with the vent manufacturer's documentation. A catalog listing cannot confirm installation details.