100RB Series Solenoid Valves are Emerson Flow Controls valves listed as 2-way, normally closed, and direct acting. The listing includes ODF models in 1/4, 3/8 and 1/2 inch connection sizes, along with SAE flare models in 1/4 and 3/8 inch. Position and body pattern are the first check when replacing or specifying a unit, and each listing names both. Contractors and service technicians then narrow the choice by connection size and connection type, comparing each against the existing line. Because listing names also carry the series and connection, matching a replacement to an existing part is easier. Getting the connection type and size right matters because it decides how the valve ties into the line and whether the swap goes smoothly the first time, which saves a return trip to the supplier.
Subcategories
Buying Guide
Start with valve function. The 100RB valves in this listing are 2-way, normally closed, and direct acting, so confirm the original valve has the same body pattern, position, and action before choosing a replacement. A mismatch on any of the three changes how the valve behaves in the system.
Next, pick the connection type. ODF and SAE flare models are both listed, so match the connection type to the existing line before ordering.
Then confirm size. ODF models are listed in 1/4, 3/8 and 1/2 inch connection sizes, and SAE flare models are listed in 1/4 and 3/8 inch. When comparing 100RB Series Solenoid Valves, check the size shown in the product name against the existing connection rather than assuming it matches another series.
Finally, review the product page for electrical details. Coil and voltage details are not shown in the product names, so check each listing and the existing system before ordering. Keep the original valve's model information ready, compare it to the listing, and confirm with the manufacturer or a SupplyHouse specialist if any detail is unclear.
Because the listed valves are distinguished by connection type and size, small details decide fit. Taking a few minutes to compare each attribute is faster than returning a part that does not match the line.
Frequently Asked Questions
What do the 100RB series solenoid valves have in common?
The 100RB Series Solenoid Valves in the listing are Emerson Flow Controls valves described as 2-way, normally closed, and direct acting. They differ by connection type and size. Compare both against the existing valve before ordering.
What connection types do 100RB solenoid valves come with?
The 100RB Series Solenoid Valves in the listing show ODF and SAE flare connection types. ODF models are listed in 1/4, 3/8 and 1/2 inch sizes. SAE flare models are listed in 1/4 and 3/8 inch sizes.
What does normally closed mean for a 100RB solenoid valve?
The 100RB solenoid valves in the listing are described as normally closed, which is the valve position named in each product title. Check the original valve's position before replacing it. Confirm any open questions with the manufacturer or a SupplyHouse specialist.
Is there a 1/2 inch 100RB solenoid valve?
The 100RB Series Solenoid Valves listing includes a 1/2 inch ODF 2-way, normally closed, direct acting valve. The SAE flare models in the listing are 1/4 and 3/8 inch. Verify other sizes on the individual product pages.
Can an ODF 100RB solenoid valve replace an SAE flare one?
ODF and SAE flare are listed as different connection types on the 100RB solenoid valves, so the models are separate. Match the connection type to the existing line before ordering. Confirm fit with the manufacturer or a SupplyHouse specialist before swapping.