Apply to be a TradeMaster!
Filter menu expanded

Filters

4 items
Reset

SORT

Product Availability
–

Show In Stock Only (4)

Flow At 5 FT Head
–

67 GPM (1)
60 GPM (3)

Shutoff Head (ft.)
–

36' (1)
60' (3)

Voltage
–

115V (4)

Cord Length
–

20' (3)
30' (1)

Review Score
–

(1)
(1)

10E Series 1/2 HP

Help Face
Need a little help?
4 items
Grid
List
Compare
Product Image of 10ECH-CIM, 1/2 HP, 60 GPM - Submersible High Head Manual Effluent Pump - 20 ft Power Cord
$551.88 each
In Stock
Get 2 by Mon, Nov 23
In Stock
Get 2 by Mon, Nov 23
Compare
Product Image of 10EC-CIM 1/2 HP, 67 GPM - Submersible Sump Effluent Pump, 20 ft power cord
$358.99 each
In Stock
Get 4 by Mon, Nov 23
In Stock
Get 4 by Mon, Nov 23
Compare
Product Image of 10ECH-CIA-SFS 1/2 HP, 60 GPM, 115V - Automatic Sump Effluent Pump with Float Switch, 30ft cord
10ECH-CIA-SFS 1/2 HP, 60 GPM, 115V - Automatic Sump Effluent Pump with Float Switch, 30ft cord
SKU: 511624
Little Giant
SKU: 511624
Brand: Little Giant
$700.14 each
In Stock
Get 1 by Mon, Nov 23
In Stock
Get 1 by Mon, Nov 23
Resources
FAQs, Manuals & Videos
Videos
Articles
More About 10E Series 1/2 HP

10E Series 1/2 HP pumps are Little Giant sump and effluent pumps built around a 1/2 hp PSC motor and a cast iron body. The 10EC Series delivers 67 gpm at 5 feet with a 36 foot shut off and handles 1/2 inch solids on 115 V, 60 Hz power. The 10ECH Series trades flow for lift, with 60 gpm at 5 feet, a 60 foot shut off and 3/4 inch solids handling. Both series use a 1-1/2 inch discharge and carry a 140 °F maximum liquid temperature rating. Contractors use them for sump pits, light septic and high flow sump duty, leach field transfer, and residential wastewater removal. Matching the series to the head and solids requirements of the job matters, because an undersized pump struggles on long discharge runs and a mismatched switch can stick in a tight basin.

Subcategories

  • 10EC Series Sump and Light Effluent Pumps: The 10EC Series is the sump and light effluent line, built on a 1/2 hp high-speed PSC motor. Contractors use it for light septic or high flow sump duty and for pumping to a leach field or drainage where gravity feed isn't possible. It delivers 67 gpm at 5 feet with a 36 foot shut off and handles 1/2 inch solids. Polypropylene base models reduce weight.
  • 10ECH Series High-Head Effluent Pumps: The 10ECH Series is the higher-lift effluent pump, with a 1/2 hp PSC motor, a cast iron body and a thermal-protected motor. Installers use it for residential wastewater removal and dewatering where heavier effluent is present. It reaches a 60 foot shut off, delivers 60 gpm at 5 feet and passes 3/4 inch solids. Full load draw is 9 A on 115 V.
  • Float Switch Models: Float switch models bring automatic operation to either series. The 10EC comes with an integral snap-action float on a 10 ft or 20 ft cord, or a piggyback mechanical float on a 20 ft cord with the cast iron base. The 10ECH-CIA-SFS pairs an integral snap-action or mechanical float with a 20 ft or 30 ft cord, and the 10ECH-CIA-RF uses a piggyback mechanical float. Both series are listed for automatic or manual operation.
  • Manual Operation Models: Manual models are the non-float versions of each series, including the 10EC-CIM and the 10ECH-CIM. The 10EC manual models come with a 10 ft or 20 ft cord, and the 10ECH-CIM comes with a 20 ft cord. Manual models carry the same series ratings as their float counterparts, including 67 gpm at 5 feet for the 10EC and 60 gpm at 5 feet for the 10ECH. Both series are designed for continuous duty.

Buying Guide

Start with the head the pump has to overcome. The 10EC Series has a 36 foot shut off, while the 10ECH Series has a 60 foot shut off, so tall lifts and long discharge runs point toward the 10ECH. Flow figures are quoted at 5 feet of head, so check the specification sheet for output at the real operating head.

Match solids handling to the fluid next when comparing 10E Series 1/2 HP options. The 10EC passes 1/2 inch solids for sump and light effluent duty, and the 10ECH passes 3/4 inch solids for heavier residential effluent. Electrical load comes after that. Full load draw is 6.5 A on the 10EC and 9 A on the 10ECH, both on 115 V, 60 Hz, so check the circuit and any shared loads before committing.

Pick the switch to suit the pit. Manual models skip the float switch, while integral snap-action and piggyback mechanical floats come with both series. Cord length varies by model, with 10 ft and 20 ft options on the 10EC and 20 ft and 30 ft options on the 10ECH.

Confirm the 1-1/2 inch discharge matches the existing piping and check valve, and keep fluid temperature within the 140 °F limit. Both series carry a 3 year warranty.

Frequently Asked Questions

What's the difference between the 10EC and 10ECH in the 10E Series 1/2 HP lineup?

The 10E Series 1/2 HP lineup covers two Little Giant families. The 10EC Series delivers 67 gpm at 5 feet with a 36 foot shut off and 1/2 inch solids handling. The 10ECH Series delivers 60 gpm at 5 feet with a 60 foot shut off and 3/4 inch solids handling.

What voltage and amp draw do 10E Series 1/2 HP pumps run on?

The 10EC Series is rated for 115 V, 60 Hz at 6.5 A, and the 10ECH Series is rated for 115 V, 60 Hz at 9 A. Size the circuit to the full load draw of the series being installed. Confirm voltage on the specific model before ordering.

How big a solid can a 10E Series 1/2 HP pump pass?

The 10EC Series in the 10E Series 1/2 HP lineup handles 1/2 inch solids, and the 10ECH Series handles 3/4 inch solids. The 10EC is aimed at sump and light effluent work, while the 10ECH is aimed at heavier effluent wastewater. Solids larger than those ratings call for a pump built for them.

What switch options come with 10E Series 1/2 HP pumps?

The 10EC Series comes in manual, integral snap-action float and piggyback mechanical float versions. The 10ECH Series comes as the 10ECH-CIM manual model, the 10ECH-CIA-SFS with an integral snap-action or mechanical float, and the 10ECH-CIA-RF with a piggyback mechanical float. Cord lengths vary by model.

What's the max liquid temperature and warranty on 10E Series 1/2 HP pumps?

Both families in the 10E Series 1/2 HP lineup are rated for a 140 °F maximum liquid temperature. Little Giant lists a 3 year warranty on both the 10EC and 10ECH Series. Both are designed for continuous duty.

Didn't find what you're looking for? 
Let us know
.