16EH Series 1 HP pumps are Little Giant manual submersible high head effluent pumps, with the 16EH-CIM listed here as a 1 HP, 90 GPM model. Listed versions include a 230V model, a 208-240V model, and a 380-460V model, each with a 20 ft power cord. The listed specs show a 2 inch discharge and 3/4 inch solids handling. Product descriptions for the 230V and 208-240V models also describe a cast iron housing, impeller, and volute with a protective epoxy coating, an oil filled motor housing, and thermal overload protection. Voltage is the first spec to check, since the versions differ on power supply. Phase and shutoff head should also be confirmed on the exact model page before ordering. For contractors sizing a high head effluent pump for a job, the correct match on voltage and pump specs keeps the installation on schedule.
Subcategories
Buying Guide
Start with the power supply. Voltage is the clearest difference between the listings in this group. The 16EH-CIM versions listed here are offered as 230V, 208-240V, and 380-460V models, so confirm the supply voltage at the job before comparing anything else.
Next, verify phase and frequency on the exact product page because both must match the supply. The 380-460V model lists 50/60 Hz operation, with a maximum flow of 90 gpm at 60 Hz and 68.6 gpm at 50 Hz.
Then check solids and discharge. Each listing in the sample shows 3/4 inch solids handling and a 2 inch discharge, so the pipe size and the solids in the basin should fit those numbers.
When comparing 16EH Series 1 HP pumps, look at the cord and construction too. Each listing includes a 20 ft power cord, and the 230V and 208-240V descriptions note cast iron components with a protective epoxy coating.
Weigh duty and motor details as well. The 380-460V listing notes continuous duty, and the 230V and 208-240V descriptions note an oil filled motor housing and thermal overload protection. Details like these help match a pump to how often the basin cycles.
Finally, confirm shutoff head and switch type on the model page. The listings describe the pumps as manual, so plan the controls to suit that.
Frequently Asked Questions
What voltages do 16EH Series 1 HP pumps come in?
The 16EH Series 1 HP listings here include 230V, 208-240V, and 380-460V versions of the 16EH-CIM. Each is a 1 HP, 90 GPM manual submersible high head effluent pump with a 20 ft power cord. Match the voltage to the supply at the job.
What solids size can the 16EH-CIM handle?
The 16EH-CIM 1 HP effluent pumps list a 3/4 inch solids size. The discharge is listed at 2 inch on each of the sampled models.
How long is the power cord on a 16EH Series 1 HP pump?
Each 16EH-CIM model in the 16EH Series 1 HP sample comes with a 20 ft power cord. Cord length appears in each product name, so confirm the routing distance to the power source before ordering.
Are 16EH Series 1 HP pumps manual or automatic?
The 16EH-CIM listings are manual type pumps, and the 380-460V specification lists a manual switch type. Plan for controls that fit a manual pump when specifying a 16EH Series 1 HP pump.
What is the max flow on a 16EH-CIM 1 HP pump?
The 16EH-CIM 1 HP models are listed at 90 GPM. The 380-460V description lists 90 gpm at 60 Hz and 68.6 gpm at 50 Hz. Confirm the supply frequency before sizing a 16EH Series 1 HP pump to the job.