Woodford 30560 EPDM Packing
An EPDM packing replacement part used on Woodford outdoor faucets to help seal the stem/packing area and address leaks at the packing nut location.
Key Features:
- Listed as an EPDM Packing replacement part (as listed on the product page)
- Application listed as Residential (as listed on the product page)
- Woodford troubleshooting documentation identifies EPDM Packing (30560) as the replacement part used when a packing leak persists after tightening the packing nut (as stated by the manufacturer)
Compatibility & Applications:
- Woodford troubleshooting documentation references EPDM Packing (30560) for "packing leak" repairs on multiple freezeless wall faucet models, including Model 14, Model 17, Model 19, and Model 22 (as shown in the manufacturer troubleshooting sheets)
- Must only be used where the manufacturer specifies this exact part number: 30560
Installation & Operation Notes:
- Installation should be performed by a qualified plumbing professional, or by an installer familiar with outdoor faucet service practices.
- Manufacturer troubleshooting guidance for a packing leak: tighten the hex packing nut behind the handle until snug and the leak stops; if the leak persists, replace the packing with EPDM Packing (30560) (manufacturer instruction)
- Refer to the specific faucet model's service/troubleshooting documentation for the correct procedure and parts identification.
Maintenance & Troubleshooting:
- Manufacturer troubleshooting ties this part to the symptom: "packing leak" (leak from around the operating stem area during operation).
- Documented replacement logic: attempt packing nut tightening first; if leaking continues, replace with EPDM Packing (30560).
User Reviews & Q&A Summary:
- Reviews commonly describe it as a direct-fit replacement used to stop stem/packing-area leaks on Woodford outdoor faucets.
- Install feedback frequently describes the repair as straightforward and effective once the correct packing is used.
- Critical feedback trends more toward general purchasing comments (such as cost) than fitment when used for the stated application.