Bimetal disc controls are temperature-actuated switches that use a snap-action bimetal disc to open or close a circuit at a set temperature. Supco's 3/4 inch (19mm) bimetal disc controls, for example, have a maximum load capacity of 25 amps at 240VAC. Techs use them as fan controls, which close on rise, and as limit controls, which open on rise. Common applications include heating furnaces, heaters and dryers. Some models are fixed, with a set cut-in and cut-out. Others are adjustable and use a dial knob to cover a temperature range. Switch action, temperature setting, reset type and electrical rating all vary from model to model. Matching those details to the equipment matters because a mismatched control can cycle a blower at the wrong time or fail to open the circuit when a limit condition develops.
Subcategories
Buying Guide
Start with the function the equipment needs. A fan control closes on rise to start a circuit, while a limit control opens on rise to break it. Confirm the original control's action before choosing a replacement.
Next, match the temperature setting. Fixed models list a cut-out and cut-in, such as 200°F and 160°F on the Supco SHL200. Adjustable models list a range, such as 135 to 175 degrees on the AT012, which helps when one control has to cover several replacement jobs.
When shopping Bimetal Disc Controls, also compare disc size (3/4 inch on the Supco SHL, AT012 and AT021 models), switch type (SPST or SPDT), terminal style and agency listings. The SHL200 is UL recognized and CSA approved.
Check the reset type. Automatic reset models recover on their own after temperature falls. Manual reset models, such as the SHM200, stay open until reset, which suits applications where a trip should be addressed first.
Verify the electrical rating against the circuit. The SHL200 is rated for a maximum load of 25 amps at 240VAC, with 10 FLA at 120VAC and 5 FLA at 240VAC. Check FLA and LRA ratings as well as the resistive rating when the control switches a motor. When the part replaces an OEM control, match the OEM number and ratings rather than relying on temperature alone.
Frequently Asked Questions
What's the difference between a fan control and a limit control?
Both are bimetal disc controls, but they do different jobs. A fan control such as the Supco AT021 closes on rise, while a limit control such as the SHL200 opens on rise. Confirm the action of the original control before replacing it.
Can an adjustable bimetal disc control replace a fixed one?
An adjustable bimetal disc control can cover several fixed replacements when its range includes the needed setting. The Supco AT012 adjusts from 135 to 175 degrees with a 20 degree differential. Check the cut-in and cut-out on the original control before relying on an adjustable model.
What does manual reset mean on a limit control?
On a manual reset bimetal disc limit control, the switch opens at its cut-out and stays open until it's reset. The Supco SHM200 is a manual reset model with a 200°F cut-out. Technicians choose manual reset when a trip should be investigated before power returns.
What amp rating do bimetal disc controls carry?
Amp ratings on bimetal disc controls vary by model. The Supco SHL200 is rated for a maximum load of 25 amps at 240VAC, with 10 FLA at 120VAC and 5 FLA at 240VAC. Compare FLA, LRA and resistive ratings to the load being switched.
Are bimetal disc controls UL and CSA rated?
Agency marks on bimetal disc controls vary by model. The Supco SHL200, AT012 and AT021 are each listed by the manufacturer as UL recognized and CSA approved. Check the specific control before using it in a given application.