Broan Bulb Heaters & Heater/Fan Combination are bathroom units that pair an infrared bulb heater with an exhaust fan, such as the Model 162M, which moves 70 CFM through a 4-inch duct. On that model, the fan and heater can run separately or together, so an installer can provide ventilation alone or add warmth in the same bathroom. Polymeric dampers help prevent back drafts and eliminate mechanical noise, and the housing is steel. The Model 164 uses a double bulb heater and is UL Listed for 60 degree C wiring, which matters on retrofit work. Both the Model 162M and Model 164 are rated at 3.5 sones and run on 120 volts. Contractors use these units in bathroom remodels, small powder rooms, and replacement jobs where moisture, odors, and warmth all need handling in one housing. Matching the right model to the room and the existing wiring keeps the install straightforward and gives the homeowner a fan and heater that behave as expected.
Subcategories
Buying Guide
Start with the room and the job. A small bathroom or powder room that needs ventilation with added warmth points to a single bulb unit like the Model 162M, which pairs a 70 CFM fan with one 250W bulb. A job that calls for more heater output points to a double bulb unit like the Model 164, rated at 545 watts. Fan capacity is the first number to check, and both of those models move 70 CFM.
Next, check the electrical side. When comparing Broan Bulb Heaters & Heater/Fan Combination options, compare amp draw to the circuit already serving the bathroom. The Model 162M draws 2.5 amps and the Model 164 draws 4.5 amps, both at 120 volts. On retrofit jobs, note that the Model 164 is UL Listed for 60 degree C wiring.
Noise and fit come next. Both the Model 162M and Model 164 are rated at 3.5 sones. Polymeric dampers on both help prevent back drafts. Confirm the 4-inch duct size against the existing run, and check the grille size, 10-1/4 inches by 10-1/4 inches on the Model 162M, against the finished ceiling layout.
Finally, read the product page for the Type IC listing and the warranty, which is 1 year on the Model 162M, and follow the manufacturer's installation instructions for the specific model. Verify details on each product page before ordering.
Frequently Asked Questions
Can the heater and fan on a Broan bulb heater/fan combination run separately?
On the Model 162M, the fan and heater can work separately or together. Broan bulb heater and fan combinations like it let an installer run ventilation alone or add heat when the room calls for it. Check the product page of each model for its specific operation.
What airflow do Broan bulb heater/fan combinations move?
The Model 162M and Model 164 are both rated at 70 CFM, and each connects to a 4-inch duct. Broan bulb heater and fan combinations at this airflow suit smaller bathrooms and powder rooms. Confirm the CFM rating of any other model on its product page.
How loud are Broan bulb heater/fan combinations?
The Model 162M and Model 164 are both rated at 3.5 sones. Polymeric dampers on both models help prevent back drafts, and the Model 164 listing says they eliminate metallic clatter. Check the sone rating on each product page when comparing Broan bulb heater and fan combinations.
What are the electrical ratings on these Broan bulb heater/fan units?
The Model 162M is rated at 120 volts, 2.5 amps, and 300 watts. The Model 164 is rated at 120 volts, 4.5 amps, and 545 watts. Size the circuit to the rating of the specific Broan bulb heater/fan combination being installed.
Can a Broan bulb heater/fan combination go in on a retrofit job?
The Model 164 is UL Listed for 60 degree C wiring for retrofits and is listed as Type IC. Other Broan bulb heater and fan combinations should be checked individually for their listings. Follow the manufacturer's installation instructions for the specific model.