Apply to be a TradeMaster!
Filter menu expanded

Filters

7 items
Reset

SORT

Product Availability
–

Show In Stock Only (7)

Duct Size
–

4" (1)
5" (1)
6" (1)
8" (1)
10" (1)
12" (1)
14" (1)

Used With
–

DEDPV-705 (1)
MUAH20/14 (1)
MUAS1200 (1)
MUAS1600 (1)
MUAS2000 (1)
MUAS750 (1)

Review Score
–

(6)

Price Range
–

$20 to $25 (1)
$30 to $35 (1)
$40 to $45 (1)
$45 to $50 (2)
$50 to $60 (2)

Clamps for Round Duct

Help Face
Need a little help?
7 items
Grid
List
Compare
Product Image of FC4 Mounting Clamp for Round 4" Duct (Pair)
$30.45 each
In Stock
Get 5 by Mon, Nov 23
In Stock
Get 5 by Mon, Nov 23
Compare
Product Image of FC8 Mounting Clamp for Round 8" Duct (Pair)
$42.82 each
In Stock
Get 18 by Mon, Nov 23
In Stock
Get 18 by Mon, Nov 23
Compare
Product Image of FC10 Mounting Clamp for Round 10" Duct (Pair)
$54.29 each
In Stock
Get 24 by Mon, Nov 23
In Stock
Get 24 by Mon, Nov 23
Compare
Product Image of FC6 Mounting Clamp for Round 6" Duct (Pair)
$49.01 each
In Stock
Get 18 by Mon, Nov 23
In Stock
Get 18 by Mon, Nov 23
Compare
Product Image of FC12 Mounting Clamp for Round 12" Duct (Pair)
$59.74 each
In Stock
Get 11 by Mon, Nov 23
In Stock
Get 11 by Mon, Nov 23
Compare
Product Image of 14" Stabilizing Mounting Clamps (Pack of 2)
$46.86 each
In Stock
Get 2 by Mon, Nov 23
In Stock
Get 2 by Mon, Nov 23
Compare
Product Image of FC5 Mounting Clamp for Round 5" Duct (Pair)
$24.72 each
In Stock
Get 2 by Tue, Nov 24
In Stock
Get 2 by Tue, Nov 24
Resources
FAQs, Manuals & Videos
Articles
More About Clamps for Round Duct

Clamps for round duct secure sections of round or spiral HVAC ductwork together at the joint, creating a mechanical connection that resists vibration and airflow pressure without relying on screws alone. Quick-release styles slide directly over the joined duct ends and close with a latch, a design suited to service work where sections need to come apart again for cleaning or repair. Larger spiral duct installations use a different approach: E-Z flange barrel clamps built from 16-gauge galvanized steel, meeting ASTM A-653 specifications, connect duct sections from 26 to 96 inches in diameter using two 3/8-inch carriage bolts instead of a perimeter of screws. Vertical riser clamps, built from lighter 24-gauge galvanized sheet metal, handle a different job, supporting round duct where it penetrates a roof or terminates at a side wall in 4, 6, and 8-inch diameters. Matching clamp style to duct diameter and installation type keeps the joint airtight and mechanically sound over the life of the system.

Subcategories

  • Quick-Release Slide Clamps: Quick-release clamps slide directly over the flanged ends of joined round duct sections and close with an adjustable draw latch. Material options include carbon steel, stainless steel, and aluminum, depending on the corrosion resistance or weight needed for the installation. Because the clamp opens and closes without tools, technicians favor this style on duct runs that need periodic disassembly for cleaning or inspection. Correct sizing matters, since an over-tightened clamp can dent thin-gauge duct while a loose one fails to seal the joint.
  • E-Z Flange Barrel Clamps: E-Z flange barrel clamps join large-diameter spiral duct sections using a locking barrel mechanism and two 3/8-inch carriage bolts rather than a full ring of screws. Built from 16-gauge galvanized steel meeting ASTM A-653 specifications, this clamp style covers duct diameters from 26 to 96 inches and works on single wall, double wall, and flat oval construction. Sections can be disassembled and reassembled on site, which matters for large commercial duct runs that need field modification after installation.
  • Vertical Riser Clamps: Vertical riser clamps support round duct at roof and side wall penetrations, a location where the duct run changes direction and needs mechanical backing beyond the joint itself. Built from 24-gauge galvanized sheet metal, these clamps are sized for 4, 6, and 8-inch diameter duct. Contractors install this clamp style on rooftop terminations and side wall vent runs where the duct needs rigid support at the penetration point.

Buying Guide

Match the clamp to the duct diameter first, since the three common styles cover different ranges. Quick-release slide clamps fit smaller residential and light commercial duct sizes and close with an adjustable latch for tool-free installation. E-Z flange barrel clamps step up to large-diameter spiral duct, covering 26 to 96 inches using a barrel-and-bolt design instead of a perimeter of screws. Vertical riser clamps handle a narrower 4, 6, and 8-inch range specifically at roof or side wall penetrations, where the duct needs rigid mechanical support rather than a simple joint connection. Material selection follows a similar logic. Galvanized steel covers most standard indoor and sheltered installations, while stainless steel, aluminum, or alloy steel options suit corrosive, high-moisture, or high-temperature environments where standard galvanized coatings wear faster. Gauge thickness varies by product: E-Z flange clamps use 16-gauge steel for structural rigidity on large spiral duct, while vertical riser clamps use lighter 24-gauge material appropriate for their supporting role rather than a primary structural joint. Clamps for Round Duct that need to come apart for future service, such as sections requiring periodic cleaning, favor the quick-release slide design over a bolted or riveted connection. Confirming the clamp meets the duct construction standard specified for the project keeps the installation aligned with inspection requirements on commercial jobs.

Frequently Asked Questions

What size duct works with a quick-release clamp?

Quick-release slide clamps generally fit smaller residential and light commercial round duct sizes and close with an adjustable draw latch that opens without special tools. Correct sizing matters because an over-tightened clamp can dent thin-gauge duct while a loose one fails to seal the joint. Checking the clamp's minimum and maximum fitment range against the actual duct diameter before ordering avoids a mismatched fit.

What clamp works on large spiral duct?

E-Z flange barrel clamps handle large-diameter spiral duct, covering sections from 26 to 96 inches using a locking barrel mechanism and two 3/8-inch carriage bolts. Built from 16-gauge galvanized steel meeting ASTM A-653 specifications, this style works on single wall, double wall, and flat oval duct construction. Sections joined this way can be taken apart and reassembled on site for field modifications.

What is a vertical riser clamp used for?

Vertical riser clamps support round duct at roof or side wall penetrations, giving the duct rigid backing where it changes direction or terminates outside the building. Built from 24-gauge galvanized sheet metal, these clamps are sized for 4, 6, and 8-inch diameter duct. Rooftop and side wall vent terminations are the most common installation points for this clamp style.

What materials are round duct clamps made from?

Round duct clamps come in carbon steel, stainless steel, alloy steel, aluminum, and titanium, depending on the environment and durability needed. Galvanized steel covers most standard indoor installations, while stainless steel or alloy options suit corrosive or high-moisture environments. Matching the material to the operating conditions keeps the clamp from degrading faster than the duct it secures.

Can a duct clamp be removed and reused?

Quick-release slide clamps and E-Z flange barrel clamps are both designed to come apart and reassemble, making them suitable for duct runs that need periodic service. Quick-release styles use an adjustable draw latch, while E-Z flange clamps rely on two carriage bolts instead of a full ring of screws. Riveted or permanently fastened joints, by contrast, are not designed for repeated disassembly.

Didn't find what you're looking for? 
Let us know
.