Duckt-Strip is a ductless mini-split installation cable now sold under RectorSeal, a manufacturer headquartered at 2601 Spenwick Drive in Houston, Texas, and part of CSW Industrials.
The product line addresses one problem in ductless installs. It carries power, control, and communication wiring between the outdoor condensing unit and the indoor unit through one cable instead of separate wires. RectorSeal's acquisition of the Duckt-Strip line brought the product under a manufacturer already serving HVAC and plumbing contractors with line set and installation accessories.
Product Lines
Duckt-Strip cable ships in several packaging formats to match different job sizes. Options are a Universal Connector Pack, 50-foot and 100-foot coils for smaller runs, a 250-foot pull box, and a 500-foot reel for larger multi-unit projects.
The cable itself supports both 4-conductor and 5-conductor mini-split configurations, covering systems with different control wiring needs, and uses a UV-resistant jacket suited to outdoor line set runs.
Why Contractors Specify Duckt-Strip
The cable's Rip-n-Strip design lets an installer separate the individual conductors by pulling rather than cutting each wire by hand. This cuts time off every termination compared to standard jacketed cable.
Color-coded conductors also reduce wiring mistakes at the indoor and outdoor units, an advantage on multi-unit jobs where several cables run to a single condenser. Supporting both 4- and 5-conductor setups in one cable line means a contractor can stock one product for most mini-split jobs instead of carrying separate cable types.
RectorSeal backs the line with a minimum 3-year limited warranty.
How to Choose Duckt-Strip Products
First confirm whether the mini-split system's control wiring calls for a 4-conductor or 5-conductor cable, since Duckt-Strip is built for both.
Next, match packaging to the job. A single condenser run is often covered by a 50-foot or 100-foot coil. Multi-unit installs or larger commercial projects may call for the 250-foot pull box or 500-foot reel.
Outdoor runs should account for the cable's UV-resistant jacket, sun exposure, and the routing distance from the condensing unit to the indoor unit.
Frequently Asked Questions
What is Duckt-Strip used for?
Duckt-Strip is an installation cable that carries power, control, and communication wiring between the outdoor condensing unit and indoor unit in a ductless mini-split system.
Who manufactures Duckt-Strip?
Duckt-Strip is manufactured by RectorSeal, headquartered in Houston, Texas, and part of CSW Industrials.
What conductor counts does Duckt-Strip support?
Duckt-Strip supports both 4-conductor and 5-conductor mini-split installations.
What packaging options does Duckt-Strip come in?
Duckt-Strip is available as a Universal Connector Pack, 50-foot and 100-foot coils, a 250-foot pull box, and a 500-foot reel.
What warranty does Duckt-Strip carry?
RectorSeal backs Duckt-Strip with a minimum 3-year limited warranty.