DuraVent Venting covers double-wall and triple-wall pipe systems built for venting gas, oil, wood, pellet, and multi-fuel appliances in homes and light commercial buildings. PelletVent Pro, one of the most widely installed lines in this category, uses a .012 inch inner wall of 444 stainless steel and a .018 inch laser-welded galvalume outer wall, and it carries a continuous flue temperature rating up to 570 degrees Fahrenheit. Installers working on pellet stoves, oil furnaces, wood inserts, and gas fireplaces need a system that matches the appliance's fuel type, flue temperature, and clearance to combustibles exactly as the appliance manual specifies. Mixing components from different DuraVent lines or from other manufacturers voids listing and creates a fire risk, so contractors stock full runs of pipe, elbows, and adapters from a single line for each job. Getting the diameter, wall construction, and finish right the first time keeps installs on schedule and passes inspection without a callback.
Subcategories
Buying Guide
Start with the appliance manual, not the pipe. Every gas, oil, wood, or pellet appliance lists the specific venting system and diameter it is listed with, and installing anything else voids the appliance listing and can void the warranty. Confirm the fuel type first: gas fireplaces and stoves typically call for DirectVent Pro, wood stoves and fireplaces call for DuraTech, and pellet, oil, or biofuel appliances call for PelletVent Pro or PelletVent for Multi-Fuel depending on what the unit burns. Next, check the appliance collar size against the pipe diameter. DuraVent Venting components only connect within their own product line, so mixing a PelletVent elbow with a DuraTech run will not seal correctly and will fail inspection. Clearance to combustibles varies by line, from 1 inch on PelletVent Pro to 2 inches on DuraTech, so measure the chase or wall cavity before ordering to confirm the run fits. Finish matters too: DirectVent Pro ships in galvanized or black outer wall options, so match the finish to what is visible in the finished space. Order full kits, straight lengths, elbows, wall thimbles, and termination caps, from a single line rather than piecing together parts from different systems. Finally, verify local code requirements for termination clearances from windows, doors, and grade before scheduling a rough-in inspection.
Frequently Asked Questions
What is the difference between PelletVent Pro and PelletVent for Multi-Fuel?
PelletVent Pro is listed for wood pellet, oil, and single biofuel appliances, while PelletVent for Multi-Fuel is built for stoves rated to burn a wider range of biofuels such as corn, wheat, and sunflower hulls. Both use a double-wall stainless steel and galvalume construction rated for continuous flue temperatures up to 570 degrees Fahrenheit. Choosing between them depends on what the specific appliance manufacturer lists in the installation manual.
Can DuraTech and DirectVent Pro components be mixed on the same job?
DuraTech and DirectVent Pro are separate listed systems and their components are not interchangeable. DuraTech is an all-fuel chimney system for wood stoves and fireplaces, while DirectVent Pro is a sealed direct vent system for gas appliances. Combining parts from the two lines breaks the listing and creates a safety hazard, so each appliance needs its own matched system.
What clearance to combustibles does DuraTech require?
DuraTech requires a 2 inch clearance to combustible materials such as framing and insulation. The 2 inch clearance allows the Thermal Tech blanket insulation between the dual walls to keep the outer wall cool while flue gases stay hot. Confirm the exact clearance in the installation instructions before framing the chase.
What sizes does DirectVent Pro come in?
DirectVent Pro is available in a 4 inch inner by 6.625 inch outer pipe and a 5 inch inner by 8 inch outer pipe. Size selection depends on the gas appliance's vent collar and the manufacturer's venting tables. Both sizes are available with a galvanized or black outer wall finish to match the finished space.
What temperature rating do PelletVent systems carry?
Both PelletVent Pro and PelletVent for Multi-Fuel carry a continuous flue temperature rating up to 570 degrees Fahrenheit. The rating covers wood pellet, oil, corn, and other biofuel appliances listed for these systems. Exceeding the rated temperature range calls for a different venting system entirely.