EMT Non-Insulated Set Screw Connectors are steel fittings that join electrical metallic tubing to a box or enclosure using one or two set screws that bite into the conduit wall rather than a compression ring. Steel construction with a zinc plated finish meets UL Standard 514B and NEMA FB-1, and the connectors are available in sizes from 1/2 inch up to 2 inch in the non-insulated steel line, with larger sizes up to 4 inch available in the broader set screw connector family. Smaller sizes typically use a single set screw while sizes 2-1/2 inch and larger use two, giving a heavier conduit run a more secure grip. Electricians choose the non-insulated version over an insulated-throat connector when the application doesn't require a plastic bushing to protect conductor insulation from the metal edge inside the connector. Because the connector locks down with a screwdriver rather than a compression tool, it installs quickly on both new conduit runs and retrofits where a compression connector's ring wouldn't seat as easily.
Subcategories
Buying Guide
Start with conduit size, since that determines both the connector body size and the number of set screws. Sizes from 1/2 inch through 2 inch use a single set screw, while 2-1/2 inch and larger step up to two screws for a firmer grip on larger tubing. Ordering the wrong body size means the conduit either won't seat fully in the connector or sits too loose for the screw to bite properly.
Confirm whether the installation needs an insulated throat before ordering the non-insulated version. EMT Non-Insulated Set Screw Connectors skip the plastic throat bushing that protects conductor insulation from the metal edge inside the connector, which works fine on runs pulling THHN or similar tough-jacketed conductors but isn't the right call everywhere code requires bushing protection. Checking the conductor type and local code before choosing between insulated and non-insulated saves a change-out later.
For concrete-encased runs, plan on taping the joint between the conduit and connector rather than buying a different product. A standard set screw connector becomes concrete-tight once taped, so there's no need to source a specialty fitting for slab work. Material matters too: steel connectors with a zinc plated finish handle general indoor and outdoor dry-location work, and matching UL 514B and NEMA FB-1 listings across the whole run keeps the installation consistent with inspection requirements from box to box.
Frequently Asked Questions
How many set screws does an EMT connector need for larger conduit?
Sizes from 1/2 inch through 2 inch use a single set screw to lock onto the conduit. Sizes 2-1/2 inch and larger step up to two set screws for a firmer grip on the larger conduit body. The extra screw on bigger sizes distributes clamping force across more of the conduit wall.
When is a non-insulated set screw connector the right choice over an insulated one?
A non-insulated connector skips the plastic throat bushing that protects conductor insulation from the metal edge inside the fitting. Runs using THHN or other tough-jacketed conductors often work fine without that extra bushing. Checking local code requirements before choosing confirms whether bushing protection is mandatory for the specific installation.
What UL standard applies to EMT set screw connectors?
EMT non-insulated set screw connectors meet UL Standard 514B along with NEMA FB-1 requirements. Steel construction with a zinc plated finish is standard across sizes from 1/2 inch through 2 inch and beyond. Matching listings across an entire conduit run keeps the installation consistent for inspection.
Can a standard set screw connector be used in a concrete-encased conduit run?
A standard set screw connector becomes concrete-tight once the joint between the connector and conduit is taped. Taping keeps wet concrete out of the connection during the pour without requiring a different, specialty fitting. Electricians use this method on slab and underground conduit runs regularly.
What material are EMT non-insulated set screw connectors made from?
EMT non-insulated set screw connectors are made from steel with a zinc plated finish for corrosion resistance. Steel construction holds up under the torque needed to seat the set screw against the conduit wall without stripping. Steel and zinc plating stay standard across the size range from 1/2 inch to 2 inch and the larger two-screw sizes.