Fab 4 Fabriflex Ducting (Non-Insulated) is a Z-FLEX duct line listed in 25 foot lengths across several diameters. The models in the listing include 3 inch, 4 inch, 5 inch, 8 inch and 20 inch sizes, and each is identified as non-insulated. Diameter is the main spec on every model, since it has to match the collar, boot or trunk connection the duct serves. The non-insulated designation is part of each product name, so it is worth confirming before an order goes out, especially on jobs where the specification calls for insulated duct. Because each model shown comes in a 25 foot length, estimating how many lengths a run needs is a simple division once the run is measured. Matching diameter and insulation type at the start keeps the install on schedule and avoids rework on the job.
Subcategories
Buying Guide
Start with diameter. The models in the listing are 3 inch, 4 inch, 5 inch, 8 inch and 20 inch, and the diameter has to match the connection on the equipment, boot or trunk the duct will serve. Measure the connection first, and check the design before rounding to a nearby size.
Next, confirm the insulation type. Each model shown is non-insulated, so if the job specification calls for insulated duct, look for a different product. Insulation requirements vary by job, so read the specification before ordering. Then work out length. Each model shown comes in a 25 foot length, so divide the measured run by 25 to estimate how many lengths a job needs, and plan for connections and fittings separately.
When ordering Fab 4 Fabriflex Ducting (Non-Insulated), read the product name on every line item, since the brand, diameter, length and insulation type all appear there. Z-FLEX is the brand on each model shown. Comparing those four details against the job specification takes a minute and helps avoid ordering mistakes, such as a wrong diameter or the wrong insulation type. Keep the diameter consistent throughout a run unless the design calls for a size change, and confirm any other installation requirements with the manufacturer's documentation. Ask the project engineer or inspector when the specification is unclear.
Frequently Asked Questions
What diameters does Fab 4 Fabriflex duct come in?
Fab 4 Fabriflex Ducting (Non-Insulated) in the listing includes 3 inch, 4 inch, 5 inch, 8 inch and 20 inch models. Each model shown is a Z-FLEX product in a 25 foot length. Check the diameter on the spec line before ordering.
Is Fab 4 Fabriflex duct insulated?
The Fab 4 Fabriflex ducts in this listing are non-insulated, as the product names state. If a job calls for insulated duct, look at a different product. Confirm the insulation type before ordering.
How long is each piece of Fab 4 Fabriflex duct?
Each Fab 4 Fabriflex duct model shown is a 25 foot length. Divide the measured run by 25 to estimate the number of lengths. Plan connections and fittings separately.
Who makes Fab 4 Fabriflex duct?
Fab 4 Fabriflex Ducting (Non-Insulated) is a Z-FLEX product line. Every model shown in the listing carries the Z-FLEX brand. Check each product page for the exact diameter and length.
How do I pick the right diameter?
Match the Fab 4 Fabriflex duct diameter to the connection it serves, such as the equipment collar or boot. The listing includes 3 inch, 4 inch, 5 inch, 8 inch and 20 inch models. Measure the connection and confirm it against the design before ordering.