Gray Acetal Tees are push-fit tee fittings from John Guest used to branch a tube run. The models on this page include equal tees in 1/4 inch, 3/8 inch, and 1/2 inch OD, plus a 3/8 inch by 3/8 inch by 1/4 inch reducing tee. Push-fit technology allows quick disconnection without the need for tools, and several product descriptions note suitability for soft metal or plastic tubes. The gray push-fit acetal copolymer construction is described as suitable for foodstuff, potable liquids, and inert gases on the 1/2 inch model. The 1/4 inch and 3/8 inch equal tees are also described as suitable for potable liquids and for air or inert gases. For installers working on small-diameter tubing, a tee that disconnects without tools makes branch changes faster. Matching the OD of the fitting to the tube is the first check on any push-fit job.
Subcategories
Buying Guide
Start with the tube OD. Push-fit tees on this page are sized by OD, such as 1/4 inch, 3/8 inch, and 1/2 inch, and the fitting has to match the tube it connects. Pick an equal tee when all three connections use the same tube size, and a reducing tee when the branch is smaller than the main line, like the 3/8 inch by 3/8 inch by 1/4 inch model.
Next, match the tube material and the medium. Several product descriptions note suitability for soft metal or plastic tubes, and for air or inert gases. The 1/4 inch, 3/8 inch, and 1/2 inch equal tees are described as suitable for potable liquids. Confirm the tube material and fluid against the specific product description before installing, since wording varies between models.
When comparing Gray Acetal Tees, look at how the fitting will be serviced. Push-fit technology allows quick disconnection without the need for tools, and the 1/2 inch model is described as fully demountable with a collet locking design. Fittings that can be released without tools suit lines that may need maintenance later.
Each model is a separate listing with its own OD, so compare the name and specifications on the product record rather than the category title alone. Questions about pressure, temperature, or approvals are not covered in the listing text, so verify them with the manufacturer before specifying.
Frequently Asked Questions
What are Gray Acetal Tees used for?
Gray Acetal Tees are push-fit fittings that branch a tube run. Product descriptions note suitability for soft metal or plastic tubes and for air or inert gases. Several listings also describe them as suitable for potable liquids.
Can I disconnect a John Guest acetal tee without tools?
John Guest Gray Acetal Tees use push-fit technology, and the product descriptions note quick disconnection without the need for tools. The 1/2 inch model is also described as fully demountable. Check the product description for the specific model being used.
What sizes do the gray acetal tees come in?
The Gray Acetal Tees here include equal tees in 1/4 inch, 3/8 inch, and 1/2 inch OD. A 3/8 inch by 3/8 inch by 1/4 inch reducing tee is also listed. Match the OD to the tube before choosing.
What is the difference between an equal tee and a reducing tee?
An equal tee, like the 1/2 inch OD model, uses the same tube size on all connections. A reducing tee, like the 3/8 inch by 3/8 inch by 1/4 inch model, has a 3/8 inch tube OD and a 1/4 inch branch OD. Gray Acetal Tees include both layouts.
Are gray acetal tees suitable for potable water lines?
Product descriptions for the 1/4 inch, 3/8 inch, and 1/2 inch equal tees describe them as suitable for potable liquids. Pressure and temperature ratings are not in the listing text for Gray Acetal Tees. Verify those ratings and any approvals with the manufacturer before installing.