Lennox 80M52 Inducer Motor Assembly
An OEM Lennox inducer motor assembly used in Lennox HVAC equipment to move combustion air through the burners and heat exchanger and support proper venting during heating operation when the correct replacement assembly is required.
Key Features
- Official OEM Inducer Motor Assembly for Lennox HVAC equipment
- Listed as replacing: 80M5201
Compatibility & Applications
- Listed for Lennox HVAC equipment.
- Must only be used where the manufacturer specifies this exact part number: 80M52 (confirm by unit model/serial and the unit's parts list/service literature).
Installation & Operation Notes
- Installation and service must be performed by a licensed professional HVAC installer (or equivalent) / service agency / gas supplier
Maintenance & Troubleshooting
- The combustion air inducer operates during heating, including a pre-purge before ignition and post-purge after the gas valve closes, and is monitored by a pressure switch used to prove inducer operation.
- Troubleshooting context typically includes no-heat/failed ignition sequence conditions where the inducer cannot establish proper draft, or abnormal inducer noise (whining) indicating wear.
- If draft/pressure conditions are not met (such as with a flue obstruction), the pressure switch opens and the control de-energizes the gas valve to prevent burner operation -