PEX Press 90° Elbows are Viega zero lead bronze fittings that make a 90 degree turn in a PEX run using a press connection. The Viega elbows listed here have an attached sleeve, and the sizes include 1/2", 3/4", 1", 1-1/4", and 1-1/2". The listed PEX size matches the elbow size, so a 1/2" elbow goes with 1/2" PEX. Because the sleeve is attached, installers don't have a separate sleeve to track at each joint. Every turn in a PEX run is another joint that has to hold, so the elbow's material and size deserve a close look before the order goes in. Both specs appear in each product name, which makes it simple to check the part against the plan. Matching the right size and material at the elbow keeps the rough-in moving and cuts the risk of rework.
Subcategories
Buying Guide
Start with the tubing size. Sizing the elbow to the tubing comes first because every other spec depends on it. Getting that match wrong stalls a rough-in. The Viega elbows referenced here list a PEX size equal to the elbow size, in 1/2", 3/4", 1", 1-1/4", and 1-1/2". Confirm the PEX size in the run, then pick the elbow with the same size.
Confirm the connection type next. The listed elbows use a PEX Press connection, so the tubing and tooling on the job need to suit press joints. Check compatibility before ordering.
Material is the third check. The Viega elbows referenced here are zero lead bronze, and the material is named in each product title. Confirm that the job specification and local code accept that material.
When selecting PEX Press 90° Elbows, also look at the sleeve. The listed Viega elbows come with an attached sleeve, so the sleeve is already part of the fitting. Each joint has one less loose part to handle.
Finally, plan the layout by size. Count the 90 degree turns in each size of tubing, and order elbows to match those counts. Because each size is a separate part, the order list should break out quantities size by size. Confirm each part number against the plan before the order goes in.
Frequently Asked Questions
What sizes do PEX press 90° elbows come in?
The Viega PEX Press 90° elbows referenced on this page come in 1/2", 3/4", 1", 1-1/4", and 1-1/2". Each lists a PEX size equal to its elbow size. Confirm the size against the tubing before ordering.
What are these Viega PEX press elbows made of?
The Viega PEX Press 90° elbows referenced here are zero lead bronze. The material appears in each product title. Check that the job specification accepts it.
Do PEX press 90 degree elbows come with the sleeve attached?
The Viega PEX Press 90° elbows referenced here come with an attached sleeve. The sleeve is part of the fitting, so no separate sleeve is needed for the listed models.
What connection do PEX press 90° elbows use?
The listed Viega PEX Press 90° elbows have a PEX Press connection, noted as the thread type in the specifications. Pair them with PEX tubing of the same listed size. Confirm tooling and tubing compatibility before ordering.
How do I match a PEX press 90° elbow to the tubing?
Match the elbow size to the PEX size. On the Viega PEX Press 90° elbows referenced here, the listed PEX size equals the elbow size, so a 3/4" elbow pairs with 3/4" PEX. Confirm the tubing type against the system requirements.