PEX Press Male Elbows are 90 degree fittings that connect PEX tubing to a male threaded connection. Viega makes the elbows on this listing with an attached sleeve, in sizes from 1/2 inch to 1-1/2 inch. The 1-1/2 inch model is bronze, lead free and meant for use with Viega PureFlow PEX, FostaPEX or Barrier PEX, with a bronze press connection and male pipe thread. Other models in the listing are identified as Zero Lead Bronze or Lead Free. The 1/2 inch, 3/4 inch, 1 inch, 1-1/4 inch and 1-1/2 inch models each list a PEX size and a thread size that match, so selection depends on pipe size, tubing brand and the threaded connection being made. Choosing the right size and compatible tubing at the start prevents fit problems where PEX meets threaded equipment.
Subcategories
Buying Guide
Start with the PEX size and the thread size. Each elbow in the listing shows a matching pair, with sizes running from 1/2 inch to 1-1/2 inch, so the pipe diameter on the PEX side sets the fitting size. The models shown list a male thread type, so the connection at the other end needs a female threaded mate.
Confirm the tubing brand next. Viega lists the 1-1/2 inch elbow for use with its PureFlow PEX, FostaPEX or Barrier PEX, so check the stated compatibility on each model page before ordering.
Material and lead content come next. The listing carries models named Zero Lead Bronze and models named Lead Free, and the 1-1/2 inch model is bronze with a Lead Free designation. Match the designation to the project requirements, and read the product name and specifications on each model.
When comparing PEX Press Male Elbows, check the sleeve designation as well. The models in this listing are named with an attached sleeve, so no separate sleeve needs to be matched to the fitting.
Finally, confirm the press tooling and system requirements with the manufacturer before ordering. Pairing the right elbow with compatible tubing and a matching thread size avoids rework on the job. Doing so keeps the installation consistent from the first fitting to the last.
Frequently Asked Questions
What sizes do PEX Press male elbows come in?
The PEX Press Male Elbows in this listing include 1/2 inch, 3/4 inch, 1 inch, 1-1/4 inch and 1-1/2 inch Viega models. Each lists a matching PEX size and thread size, so the fitting size follows the tubing diameter.
Which PEX tubing works with the 1-1/2 inch Viega male elbow?
Viega lists the 1-1/2 inch PEX Press Male Elbow for use with PureFlow PEX, FostaPEX or Barrier PEX. Check the stated compatibility on the other sizes before ordering them for a job.
Are PEX Press male elbows lead free?
The PEX Press Male Elbows in this listing include models named Zero Lead Bronze and models named Lead Free. The 1-1/2 inch model is listed as bronze and lead free. Read each product page for the exact designation on the size needed.
Do PEX Press male elbows come with the sleeve attached?
The PEX Press Male Elbows shown in this listing are named as 90 degree elbows with an attached sleeve. Confirm the detail on the specific model before ordering for a job.
What thread type do PEX Press male elbows use?
PEX Press Male Elbows list a male thread type on the models shown. The 1-1/2 inch model is described as a bronze press connection with male pipe thread, and each elbow's thread size matches its PEX size. Pair it with a female threaded connection.