PVC/Steel/XH C. Iron to PVC/Steel/XH C. Iron Couplings are shielded couplings that join plastic, steel or extra-heavy cast iron pipe to plastic, steel or extra-heavy cast iron pipe. Fernco's ProFlex 3005 series, for example, covers 3 inch, 4 inch and 6 inch sizes as models 3005-33, 3005-44 and 3005-66. Each ProFlex coupling pairs a flexible elastomeric sleeve with a stainless steel shield and clamp assembly, and the ProFlex line conforms to ASTM C1460, ASTM C564 and CSA B602. Plumbers use ProFlex couplings for DWV repairs, material changes and transitions on pipe that is not buried. The stainless shield resists shear forces and keeps the connection rigid and aligned. Matching the coupling to the pipe materials and the application matters, since a ProFlex transition is not the right choice for buried transitions.
Subcategories
Buying Guide
Start with the pipe materials being joined. The 3005 series connects plastic, steel or extra-heavy cast iron to the same group of materials, so confirm that each pipe falls in that list before ordering. Measure the pipe sizes next. Fernco's 3005 models are 3 inch, 4 inch and 6 inch, listed as 3005-33, 3005-44 and 3005-66.
Check the application. ProFlex couplings are for DWV repairs, material changes and transitions on pipe that is not buried. For buried transitions that carry earth loads, Fernco points to its Strong Back RC couplings instead.
When comparing PVC/Steel/XH C. Iron to PVC/Steel/XH C. Iron Couplings, look at the construction. The ProFlex shield is 301 stainless steel and resists shear forces, the clamp bands and housings are 301 stainless steel, and the screws are 305 stainless steel. The gasket is synthetic rubber. Confirm the standards match the job: ASTM C1460, ASTM C564 and CSA B602.
Plan for installation and testing. Fernco specifies 60 in-lbs of installation torque with standard tools, so set a torque driver to that value. Pressure test the joint before concealing it, as the installation instructions direct. Fernco publishes dimensional drawings for each model, which help confirm fit before the pipe is cut. Local code and the inspector have the final word on which transition couplings are allowed.
Frequently Asked Questions
What do PVC/Steel/XH C. Iron to PVC/Steel/XH C. Iron couplings connect?
PVC/Steel/XH C. Iron to PVC/Steel/XH C. Iron Couplings join plastic, steel or extra-heavy cast iron pipe to the same group of materials. Fernco's ProFlex 3005 series lists 3 inch, 4 inch and 6 inch models, 3005-33, 3005-44 and 3005-66.
Can I use a ProFlex shielded coupling on a buried line?
ProFlex couplings are made for DWV repairs, material changes and transitions on pipe that is not buried. For buried transitions that carry earth loads, Fernco directs installers to its Strong Back RC couplings. Check the application before picking any shielded transition coupling from this category.
What torque do ProFlex couplings need?
ProFlex shielded couplings use 60 in-lbs of installation torque with standard tools. Fernco's installation instructions also call for pressure testing the joint before concealing it.
What are the shield and clamp made of on these couplings?
On Fernco ProFlex shielded couplings, the shield is 301 stainless steel, the clamp bands and housings are 301 stainless steel, and the screws are 305 stainless steel. The gasket is synthetic rubber. The shield resists shear forces and keeps the connection rigid and aligned.
What standards do these couplings meet?
Fernco lists ProFlex couplings as conforming to ASTM C1460, ASTM C564 and CSA B602. Anyone buying PVC/Steel/XH C. Iron to PVC/Steel/XH C. Iron Couplings should still check local code for approved transition methods.